Features

 Floating high side driver in bootstrap operation to +100V, build in bootstrap diode

 Internal fixed dead time of 120nS

 Cross-conduction prevention logic

 800mA source/1000mA sink output current capability

 Driving N-channel MOSFETs and IGBTs in a half-bridge configuration

 High side output ,in phase with HIN input

 Low side output, out of phase with LIN input

 Minimal peripheral components

 Low quiescent current：4.5mA

 Package：SOP8

Description

The EG3013 is a cost effective half-bridge driver IC designed for N-channel MOSFETs and IGBTs.

The EG3013 includes a combined logic inputs for low and high-side drives, fixed dead time to protect

FETs, cross-conduction prevention logic, high voltage level shifter, noise filter enhanced immunity, and

provide high current capability for external N-channel MOSFETs, application for brushless motor drives.

The bootstrap operation voltage of EG3013 is up to 100VDC, the operation voltage of Vcc is between

4.5V to 30V, and quiescent supply current is only 4.5mA. Build in simultaneous conduction lockout

protection, and build in pull down resistors of 10K on HIN and pull up a current source of 300uA on LIN,

when input pins are floating, the outputs of HO and LO are held to low, the structure of high current

Darlington is used in output stage, the EG3013 is available in a SOP8 package.

Applications

E-bike controller

100V synchronous Buck converter

Class D power amplifies

Brushless pump controller

BLDC Motor drive