[CYGNAL]

ANALOG PERIPHERALS

8-bit, 32-Channel ADC

- 32 External Inputs (Each Port I/O can be configured as an ADC Input on the Fly!)

- ±1/2LSB INL

- No Missing Codes

- Programmable Throughput up to 100ksps

Two Comparators

- Programmable Hysteresis

- Configurable to Generate Interrupts or Reset

VDD Monitor and Brown-out Detector

ON-CHIP JTAG EMULATION

- On-Chip Emulation Circuitry Facilitates Full Speed, Non-Intrusive In-Circuit Emulation

- Supports Breakpoints, Single Stepping, Watchpoints

- Inspect/Modify Memory and Registers

- Superior Performance to Emulation Systems Using ICE-Chips, Target Pods, and Sockets

- $99 Development Kit (C8051F226DK)

SUPPLY VOLTAGE .................... 2.7V to 3.6V

- Typical Operating Current: 9mA @ 25MHz

- Multiple Power Saving Sleep and Shutdown Modes

8051-COMPATIBLE mmC Core

- Pipelined Instruction Architecture; Executes 70 of Instructions in 1 or 2 System Clocks

- Up to 25MIPS Throughput with 25MHz Clock

- Expanded Interrupt Handler; Up to 22 Interrupt Sources

MEMORY

- 1280 Bytes Data RAM

- 8k Bytes FLASH; In-System Programmable in 512 byte Sectors

DIGITAL PERIPHERALS

- 32 Port I/O; All are 5V tolerant

- Hardware SPITM and UART Serial Ports Available Concurrently

- Three 16-bit Counter/Timers

- Dedicated Watch-Dog Timer

- Bi-directional Reset

CLOCK SOURCES

- Internal Programmable Oscillator: 2-to-16MHz

- External Oscillator: Crystal, RC, C, or Clock

- Can Switch Between Clock Sources on-the-fly; Useful in Power Saving Modes

Temperature Range: –40°°C to +85°°C

48-Pin TQFP Package