GENERAL DESCRIPTION

EM78P156N is an 8-bit microprocessor designed and developed with low-power, high-speed CMOS technology.. It is equipped with 1K*13-bits Electrical One Time Programmable Read Only Memory (OTP-ROM). It provides three PROTECTION bits to prevent user’s code in the OTP memory from being intruded. 8 OPTION bits are also available to meet user’s requirements.

With its OTP-ROM feature, the EM78P156N is able to offer a convenient way of developing and verifying user’s programs. Moreover, user can take advantage of EMC Writer to easily program his development code.

FEATURES

• Operating voltage range : 2.5V~5.5V

• Operating temperature range: -40°C~85°C

• Operating frequency rang (base on 2 clocks ):

* Crystal mode: DC~20MHz at 5V, DC~8MHz at 3V, DC~4MHz at 2.5V.

* ERC mode: DC~4MHz at 5V, DC~4MHz at 3V, DC~4MHz at 2.5V.

• Low power consumption:

* Less then 2 mA at 5V/4MHz

* Typically 20 µA at 3V/32KHz

* Typically 1 µA during sleep mode

• 1K × 13 bits on chip ROM

• One security register to prevent intrusion of OTP memory codes

• One configuration register to accommodate user’s requirements

• 48× 8 bits on chip registers (SRAM, general purpose register)

• 2 bi-directional I/O ports

• 5 level stacks for subroutine nesting

• 8-bit real time clock/counter (TCC) with selective signal sources, trigger edges,

and overflow interrupt

• Two clocks per instruction cycle

• Power down (SLEEP) mode

• Three available interruptions

* TCC overflow interrupt

* Input-port status changed interrupt (wake up from sleep mode)

* External interrupt

• Programmable free running watchdog timer

• 8 programmable pull-high pins

• 7 programmable pull-down pins

• 8 programmable open-drain pins

• 2 programmable R-option pins

• Package types:

* 18 pin DIP 300mil : EM78P156NP

* 18 pin SOP 300mil : EM78P156NM

* 20 pin SSOP 209mil : EM78P156NAS

* 20 pin SSOP 209mil : EM78P156NKM

• 99.9 single instruction cycle commands

• The transient point of system frequency between HXT and LXT is around 400KHz