Technical features

Mass 1.1 kg

Size 190 mm

Surface of rotor Thick layer passivated

Material of electronics housing Die-cast aluminium

Material of impeller PA plastic

Number of blades 7

Direction of rotation Clockwise, seen on rotor

Type of protection IP 54

Insulation class B

Max. permissible ambient motor

temp. (transp./ storage)

+ 80 °C

Min. permissible ambient motor

temp. (transp./storage)

- 40 °C

Mounting position Any

Condensate discharge holes None, open rotor

Operation mode S1

Motor bearing Ball bearing

Technical features - Output 10 VDC, max. 1.1 mA

- Tach output

- Output limit

- Motor current limit

- Soft start

- Control input 0-10 VDC / PWM

- Control interface with SELV potential safely disconnected from the mains

- Overvoltage detection

- Over-temperature protected electronics / motor

- Line undervoltage detection

EMC interference immunity Acc. to EN 61000-6-2 (industrial environment)

EMC harmonics Acc. to EN 61000-3-2/3

EMC interference emission Acc. to EN 61000-6-3 (household environment)

Touch current acc. IEC 60990

measuring network Fig. 4, TN

system)

<= 3.5 mA

Motor protection Locked-rotor protection

Cable exit Variable

Protection class I (if protective earth is connected by customer)

Product conforming to standard EN 60335-1; CE

Approval CCC; UL 2111; CSA C22.2 No.77; EAC