13.5V/3A, 1-Cell Battery Charger with Power Path Management

ETA6964A is a highly-integrated 3A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer battery. It features fast charging with high input voltage support for a wide range of smart phones, tablets and portable devices. Its low impedance • High-Efficiency, 1.5MHz Synchronous Switching Buck Charger\n\n• 91% Charge Efficiency at 2A from 5V Input\n\n• Supports USB On-The-Go (OTG)\n\n• Boost Converter with Up to 1.2A Output\n\n• 91% Boost Efficiency at 1A Output\n\n• Output Short Circuit Protection\n\n• Wide Range Single Input t;

17- OUTPUT LED DRIVER/GPO

General Description The MAX6964 I2C-compatible serial interfaced peripheral provides microprocessors with 17 output ports. Each output is an open-drain current-sinking output rated at 50mA and 7V. The outputs are capable of driving LEDs, or providing logic outputs with external resistive pullup

17- OUTPUT LED DRIVER/GPO

General Description The MAX6964 I2C-compatible serial interfaced peripheral provides microprocessors with 17 output ports. Each output is an open-drain current-sinking output rated at 50mA and 7V. The outputs are capable of driving LEDs, or providing logic outputs with external resistive pullup

17- OUTPUT LED DRIVER/GPO

General Description The MAX6964 I2C-compatible serial interfaced peripheral provides microprocessors with 17 output ports. Each output is an open-drain current-sinking output rated at 50mA and 7V. The outputs are capable of driving LEDs, or providing logic outputs with external resistive pullup

16,384 x 32 Bit CMOS / BiCMOS Static Random Access Memory

文件：89.76 Kbytes Page：2 Pages

Bandpass Filter

文件：80.63 Kbytes Page：6 Pages