Over-Voltage-Protection IC with 80V TVS in FCQFN-9 and SOT23-6

ETA6123 is an Over-Voltage-Protection (OVP) IC with an ultra-low 40mΩ RDSON high current high voltage MOSEFT and an integrated TVS device to improve surge protection. • Over voltage protection up to 24.5V\n\n• 40mΩ switch resistance\n\n• 60nS fast transient response\n\n• Internally set current limit and VOUT short protection\n\n• Integrated 80V TVS\n\n• FCQFN-9 package, compatible to WLCSP-9 with better reliability, SOT23-6 package also available;

Speech network IC with ALC

■ Features • Wide supply voltage operation range of VCC = 2.4 V to 6.0 V • Small current consumption of ICC = 500 µA • Reduction of a bad effect by the external noise thanks to a package for a rear side mounting.

Speech network IC with ALC

■ Features • Wide supply voltage operation range of VCC = 2.4 V to 6.0 V • Small current consumption of ICC = 500 µA • Reduction of a bad effect by the external noise thanks to a package for a rear side mounting.

Single Supply Integrated Current Limiting Controller

The ISL6121 is a single supply Overcurrent (OC) fault protection IC for 2.5V to 5V applications where 2A current limiting is desired. This device features internal current monitoring and limiting along with a 50mΩ integrated power switch and a current limited time out to latch-off feature for syst

100 V DMOS SWITCHES

DESCRIPTION Realized with the Multipower-BCD mixed bipolar/CMOS/DMOS process, the L6122/23monolithic three DMOS switch is designed for high current, high voltage switching applications. Each of the three switches is controlled by a logic input and all three are controlled by a common enable input

Silicon PNP epitaxial planer transistor

Silicon PNP epitaxial planer transistor For digital circuits ■ Features ● Costs can be reduced through downsizing of the equipment and reduction of the number of parts. ● MT-1 type package, allowing supply with the radial taping.