Programmable Current-Limited Load Switch

The ETA6027 is a load switch which provides full protection to systems and loads which may encounter large current conditions. ETA6027 offers a 70mΩ current-limited switch which can operate over an input voltage range of 2.1-6V. The current limit can be externally programmed by a precision resistor, • Input Operating Voltage Range: 2.1V to 6V\n\n• 5V Input Standoff Voltage\n\n• 1V OVP\n\n• Up to 2.2A Max Load current\n\n• Programmable Current-limit: 75mA to 2200mA\n\n• Accurate Current-Limit Threshold at 1.7A: +/-5%\n\n• Fast Over-Current Response\n\n• Fault Flag Output: nFAULT Pin\n\n• Rev;

Power MOS V is a new generation of high voltage N-Channel enhancement mode power MOSFETs.

POWER MOS V® Power MOS V® is a new generation of high voltage N-Channel enhancement mode power MOSFETs. This new technology minimizes the JFET effect, increases packing density and reduces the on-resistance. Power MOS V® also achieves faster switching speeds through optimized gate layout. • Fast

PROGRAMMABLE UNIJUNCTION TRANSISTOR

[GESS] Programmable Unijunction Transistor

Dual Power MOSFET Drivers

General Description The MAX626/7/8 are dual monolithic power MOSFET drivers designed to translate TTL input to high voltage/current outputs. The MAX626 is a dual inverting power MOSFET driver. The MAX627 is a dual non-inverting power MOSFET driver, and the MAX628 contains one inverting section an

Silicon programmable unijunction transistor (PUTs)

[Planeta Electronic company]

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V * Pb / RoHS Free