16V/120mA, 1mA Termination Current Linear Charger

ETA4016 is a single cell, fully integrated constant current (CC)/constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the ETA4016 ideal for portable applications. No external sense resistor or blocking diode is necessary for the ETA4016 • 16V input standoff voltage\n\n• 4.2V charge termination voltage\n\n• 1mA termination current\n\n• 2.9V trickle charge threshold\n\n• Charge current programmable, up to 120mA\n\n• 250nA BAT current when no charging\n\n• Soft-start limits in-rush current\n\n• DFN2x2-8;

Quad Analog Switch/Quad Multiplexer

The MC14016B quad bilateral switch is constructed with MOS P–channel and N–channel enhancement mode devices in a single monolithic structure. Each MC14016B consists of four independent switches capable of controlling either digital or analog signals. The quad bilateral switch is used in signal gat

Quad bilateral switches

GENERAL DESCRIPTION The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). FEATURES •

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec