High-accuracy Linear Charger with USB Mode

The ET9513C is a cost-effective, fully integrated single-cell Li-Ion battery charger. The charger uses a CC/CV charge profile required by Li-Ion battery. The charger accepts an input voltage up to 28 V but is disabled when the input voltage exceeds the OVP threshold, typically 6.9 V, to prevent exce • 28 V Maximum Voltage for the Power Input\n\n• Internal Integrated Power MOSFETs\n\n• An internal top off timer\n\n• Support 4.2 V or 4.35 V/2.3 A Factory Mode\n\n• 50 mA Low Dropout Voltage Regulator\n\n• Status Pin Indicator\n\n• Programmed Charging Current\n\n• Programmed End-of-Charge Current\n;

System Timing Controller Advanced MOS/LSI

GENERAL DESCRIPTION The Am9513 System Timing Controller is an LSI circuit designed to service many types of courting, sequencing and timing applications.

System Timing Controller Advanced MOS/LSI

GENERAL DESCRIPTION The Am9513 System Timing Controller is an LSI circuit designed to service many types of courting, sequencing and timing applications.

System Timing Controller Advanced MOS/LSI

GENERAL DESCRIPTION The Am9513 System Timing Controller is an LSI circuit designed to service many types of courting, sequencing and timing applications.

System Timing Controller Advanced MOS/LSI

GENERAL DESCRIPTION The Am9513 System Timing Controller is an LSI circuit designed to service many types of courting, sequencing and timing applications.

Hot swappable IC and SMBus bus buffer

文件：162.94 Kbytes Page：20 Pages