锂电池充电管理

The ET9513A is a cost-effective, fully integrated single-cell Li-Ion battery charger. The charger uses a\n CC/CV charge profile required by Li-Ion battery. The charger accepts an input voltage up to 28V but is disabled when the input voltage exceeds the OVP threshold, typically 6.9V, to prevent e ●28V Maximum Voltage for the Power Input\r\n\r\n● Internal Integrated Power MOSFETs\r\n\r\n● Support 4.35V or 4.4V/2.3A Factory Mode\r\n\r\n● 50mA Low Dropout Voltage Regulator\r\n\r\n● Status Pin Indicator\r\n\r\n● Programmed Charging Current\r\n\r\n● Programmed End-of-Charge Current\r\n\r\n● Under;

System Timing Controller Advanced MOS/LSI

GENERAL DESCRIPTION The Am9513 System Timing Controller is an LSI circuit designed to service many types of courting, sequencing and timing applications.

System Timing Controller Advanced MOS/LSI

GENERAL DESCRIPTION The Am9513 System Timing Controller is an LSI circuit designed to service many types of courting, sequencing and timing applications.

System Timing Controller Advanced MOS/LSI

GENERAL DESCRIPTION The Am9513 System Timing Controller is an LSI circuit designed to service many types of courting, sequencing and timing applications.

System Timing Controller Advanced MOS/LSI

GENERAL DESCRIPTION The Am9513 System Timing Controller is an LSI circuit designed to service many types of courting, sequencing and timing applications.

Hot swappable IC and SMBus bus buffer

文件：162.94 Kbytes Page：20 Pages