3A Switch with RCB and VOUT Check Option

The ET3158E advanced load management switches target applications requiring a highly integrated solution. It disconnects loads powered from DC Power Rail (When EN is low, IN power on, ET3158E will check the voltage of the OUT pin with a 300Ω pull down resistor after 29us. If OUT is lower than 1.0V, • 2.5V to 6 V Operation voltage range\n\n• Slew rate/inrush control with tRis 2.7ms typical\n\n• Typical RDS(ON)is 29mΩat VIN=4.3V\n\n• True reverse current blocking (TRCB) when EN=Low\n\n• ESD protected: Above 8kV (contact) IEC,4kV HBM, 1.5kV CDM;

CMOS System Reset

Outline This IC is a system reset IC developed using the CMOS process. Super low consumption current of 0.25µA typ. has been achieved through use of the CMOS process. Also, detection voltage is high precision detection of ±2. Features 1. Super low consumption current 0.25µA typ. (when VDD

High CMRR RS-485 Transceiver with 짹60V Isolation

文件：305.71 Kbytes Page：14 Pages

High CMRR RS-485 Transceiver with 짹60V Isolation

文件：305.71 Kbytes Page：14 Pages

High CMRR RS-485 Transceiver with 짹60V Isolation

文件：305.71 Kbytes Page：14 Pages

High CMRR RS-485 Transceiver with 짹60V Isolation

文件：305.71 Kbytes Page：14 Pages