INTERPOLATION DEVICE

FEATURES • Interpolation factor pin selectable (1X/10X) • Index gating pin selectable (90/180 electrical degrees of interpolated pulse) • Leading edge of gated index pulse occurs at 270 electrical degrees of analog input cycle, regardless of interpolation factor selected • Interfaces direct

Charge Pump 5V/100mA output

The ET2110 Charge Pump is a MicroPower switched-capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. Using three small capacitors, the ET2110 can deliver up to 100mA to the voltage regulated output. The ET2110 features very low quiescent curre • Step-Up Voltage Converter\n\n• Input Voltage Range：2.7V to 5V\n\n• Low IQ is about 13μA\n\n• Regulated 5V ± 4% Output\n\n• 5V Output Current\n--100mA with VIN≥ 3.0V\n-- 50mA with VIN≥ 2.7V\n\n• Peak Current 250mA for 100ms\n\n• High Frequency 750 kHz Operation\n\n• Shutdown Mode Draws Less Tha;

MONORAL MIC AMP for VIDEO CAMERA

■ GENERAL DESCRIPTION NJM2110 is a monaural microphone amplifier for video camera. It can operate from 2.7V. The performance is low Operating current and small package, therefore it is easy to design the downsizing and low consumption. ■ FEATURES ● Operating Voltage ( 2.7V~5.3V ) ● L

MONORAL MIC AMP for VIDEO CAMERA

■ GENERAL DESCRIPTION NJM2110 is a monaural microphone amplifier for video camera. It can operate from 2.7V. The performance is low Operating current and small package, therefore it is easy to design the downsizing and low consumption. ■ FEATURES ● Operating Voltage ( 2.7V~5.3V ) ● L

MONORAL MIC AMP for VIDEO CAMERA

■ GENERAL DESCRIPTION NJM2110 is a monaural microphone amplifier for video camera. It can operate from 2.7V. The performance is low Operating current and small package, therefore it is easy to design the downsizing and low consumption. ■ FEATURES ● Operating Voltage ( 2.7V~5.3V ) ● L

Silicon PNP epitaxial planer transistor

Silicon PNP epitaxial planar type For digital circuits ■ Features • Costs can be reduced through downsizing of the equipment and reduction of the number of parts • Mini type package allowing easy automatic insertion through tape packing and magazine packing

L-BAND PA DRIVER AMPLIFIER

DESCRIPTION The µPG2106TB and µPG2110TB are GaAs MMIC for PA driver amplifier with variable gain function which were developed for PDC (Personal Digital Cellular in Japan) and another L-band application. The device can operate with 3.0 V, having the high gain and low distortion. The µPG2106TB is