Amplifier, 2 - 18 GHz

The ENGAD00028 amplifier operates across 2 to 18 GHz with small signal gain greater than 26 dB, noise figure less than 4 dB and output P1dB greater than 24 dBm. The ENGAD00028 uses SMA interfaces for the RF input and output ports. The ENGAD00028 operates with +8 V and -5 V supply voltages with a typ ·2 to 18 GHz Band Coverage\n·Small Signal Gain: >26 dB\n·Noise Figure: 24 dBm \n·Solid State GaN MMIC\n·SMA RF Input/Output Interface\n·Size: 1.12” x 0.95” x 0.50”\n·RoHS* Compliant;

17 W Solid State Power Amplifier, 0.3 - 3 GHz

The ENGAD00053 is a packaged Solid State Power Amplifier (SSPA) operating across 0.3 to 3 GHz with a nominal saturated output power (Psat) of 17 Watts and average 50% power added efficiency (PAE). The ENGAD00053 uses SMA connectors for the RF input and output ports. RF port impedance is 50 ohms. ·0.3 to 3 GHz Band Coverage\n·Saturated Output Power: >17 W\n·Average PAE at Psat: 50%\n·Solid State GaN MMIC\n·SMA Input/Output Interface\n·Single Bias Supply Required\n·Size: 1.33” x 1.78” x 0.50”\n·RoHS* Compliant;

Wideband Fixed Attenuator Family, DIE, DC to 50 GHz

The ENGAT000XX are a line of fixed  precision attenuators matched to 50 Ω. They have attenuation values of 0, 1, 2, 3,  4, 6, 8 and 10 dB. They come in both PI and T style resistor configurations. The  attenuators have gold backside  metallization and are designed to be silver  epoxy attached. Low i ·Ultra Wideband Performance\n·Excellent Return Loss: >20 dB typical\n·Tight Attenuation Control\n·RF Power Handling: 27 dBm\n·Die size: 0.76 x 0.76 x 0.10 mm; 0.030” x 0.030” x 0.004”\n·RoHS* Compliant\n;