Standalone Demokit based on a EM6126 LCD driver/controller interfaced by a EM6812 microcontroller - Ultra-Low Power

The EMDB6126 is a standalone demo kit based on Graphic LCD driver/controller EM6126 allowing an easy evaluation of this circuit. An EM6812 microcontroller is used to send, receive commands and data through the I2C or Serial bus.This demo kit is delivered with pre-programmed firmware on EM6812. The f • Character / Graphic LCD glass (STN Grey Reflective Positive Mode)\n• 3V Lithium battery\n• 32 kHz oscillator\n• PCB equipped with EM6812 TSSOP24\n• ROHS compliant\n;

Infrared detector module with preamp

Infrared detector module with preamp Thermoelectrically cooled type Easy-to-use detector module with built-in preamp Infrared detector modules operate just by connecting to a DC power supply. The detector element is selectable from among InGaAs, PbS, PbSe, MCT, InAs and InSb, which are all combi

Single Supply Integrated Current Limiting Controller

The ISL6121 is a single supply Overcurrent (OC) fault protection IC for 2.5V to 5V applications where 2A current limiting is desired. This device features internal current monitoring and limiting along with a 50mΩ integrated power switch and a current limited time out to latch-off feature for syst

1.2GHz PRESCALER

1.2GHz PRESCALER

4-BIT SINGLE CHIP MICROCONTROLLER FOR REMOTE CONTROL TRANSMISSION

DESCRIPTION The µPD6125A and 6126A are 4-bit single-chip microcontrollers for infrared remote controllers for TVs, VCRs, stereos, cassette decks, air conditioners, etc. These microcontrollers consist of ROM, RAM, a 4-bit parallel-processing ALU, a programmable timer, key input/output ports,

4-BIT SINGLE CHIP MICROCONTROLLER FOR REMOTE CONTROL TRANSMISSION

DESCRIPTION The µPD6125A and 6126A are 4-bit single-chip microcontrollers for infrared remote controllers for TVs, VCRs, stereos, cassette decks, air conditioners, etc. These microcontrollers consist of ROM, RAM, a 4-bit parallel-processing ALU, a programmable timer, key input/output ports,