81 and 65 MUX LCD Driver and Controller with High Uniformity of Contrast and no External Components - Ultra-Low Power

The EM6126 is an ultra-low power bit map controller and driver for full dot matrix monochrome STN LCD displays. The driving capability is 81 rows x 102 columns or 65 rows x 118 columns addressed by I2C or 3-wire interface. VLCD is internally generated up to 11V without external components.\n Appl • High accuracy of frame frequency and LCD voltage by laser trimming\n• No external components\n• OTP Trimming\n• Generated LCD voltage on chip\n• Partial display of 17 rows\n• I2C and 3-wire interfaces\n• LCD voltage digitally programmable 4.5V to 11V\n• Selectable x5, x4, x3, x2 multiplier factor ;

81 and 65 MUX LCD Controller and Driver High Uniformity of Contrast and no external components

文件：293.43 Kbytes Page：1 Pages

Infrared detector module with preamp

Infrared detector module with preamp Thermoelectrically cooled type Easy-to-use detector module with built-in preamp Infrared detector modules operate just by connecting to a DC power supply. The detector element is selectable from among InGaAs, PbS, PbSe, MCT, InAs and InSb, which are all combi

Single Supply Integrated Current Limiting Controller

The ISL6121 is a single supply Overcurrent (OC) fault protection IC for 2.5V to 5V applications where 2A current limiting is desired. This device features internal current monitoring and limiting along with a 50mΩ integrated power switch and a current limited time out to latch-off feature for syst

1.2GHz PRESCALER

1.2GHz PRESCALER

4-BIT SINGLE CHIP MICROCONTROLLER FOR REMOTE CONTROL TRANSMISSION

DESCRIPTION The µPD6125A and 6126A are 4-bit single-chip microcontrollers for infrared remote controllers for TVs, VCRs, stereos, cassette decks, air conditioners, etc. These microcontrollers consist of ROM, RAM, a 4-bit parallel-processing ALU, a programmable timer, key input/output ports,

4-BIT SINGLE CHIP MICROCONTROLLER FOR REMOTE CONTROL TRANSMISSION

DESCRIPTION The µPD6125A and 6126A are 4-bit single-chip microcontrollers for infrared remote controllers for TVs, VCRs, stereos, cassette decks, air conditioners, etc. These microcontrollers consist of ROM, RAM, a 4-bit parallel-processing ALU, a programmable timer, key input/output ports,