EG2809 四路单灯手电筒控制芯片

  EG2809 是一款专用于LED 手电筒设计的专用集成电路，采用最先进的控制技术和宽电压设计方案，工作电压可达2.5V～5.5V。\n   EG2809 具有全亮、半亮、快闪、慢闪和SOS 等功能，两个引脚OPT1 和OPT2 提供四种不同的工作模式进行选择，四路独立输出信号LED1～LED4，可通过外扩功率NMOS 管或外扩350mA 恒流芯片AMC7135，驱动3W 或3W 以上的LED 灯应用。 ·工作电压2.5V～5.5V\n ·工作电流：<150uA\n ·最大静态电流：10uA\n ·输出驱动能力：+/-100mA\n ·OPT1 和OPT2 组成4 种不同的工作模式，供不同应用场合使用\n ·具有全亮、半亮、快闪、慢闪和SOS 等功能\n ·可通过外扩功率NMOS 管或外扩350mA 恒流芯片AMC7135，驱动大功率LED 手电筒及灯具\n ·四路LED 输出信号，四路独立的状态输出模式\n ·封装型式：SOP8;

Multi-Rate to 2.7Gbps Clock and Data Recovery IC with Limiting Amplifier

PRODUCT DESCRIPTION The ADN2809 provides the receiver functions of Quantization, Signal Level Detect and Clock and Data Recovery at rates of OC-3, OC-12, Gigabit Ethernet, OC-48 and all FEC rates. All SONET jitter requirements are met, including: Jitter Transfer; Jitter Generation; and Jitter Tol

Multi-Rate to 2.7Gbps Clock and Data Recovery IC with Limiting Amplifier

PRODUCT DESCRIPTION The ADN2809 provides the receiver functions of Quantization, Signal Level Detect and Clock and Data Recovery at rates of OC-3, OC-12, Gigabit Ethernet, OC-48 and all FEC rates. All SONET jitter requirements are met, including: Jitter Transfer; Jitter Generation; and Jitter Tol

Multi-Rate to 2.7Gbps Clock and Data Recovery IC with Limiting Amplifier

PRODUCT DESCRIPTION The ADN2809 provides the receiver functions of Quantization, Signal Level Detect and Clock and Data Recovery at rates of OC-3, OC-12, Gigabit Ethernet, OC-48 and all FEC rates. All SONET jitter requirements are met, including: Jitter Transfer; Jitter Generation; and Jitter Tol

NOCAP 135 mW Stereo Headphone Power Amplifier

文件：186.79 Kbytes Page：22 Pages

NOCAP 135 mW Stereo Headphone Power Amplifier

文件：186.79 Kbytes Page：22 Pages