FEATURES

The STM32F765VI ARM Cortex M7 processor running at 216 MHz with 512KB of RAM and 2 MB of flash. All I/O pins

output 3.3V and are 5V tolerant. The processor has the following I/O interfaces:

 A full speed USB (12Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a

USB Flash Drive when plugged in.

 A μSD Card socket capable of 100Mbs reads/writes which allows your OpenMV Cam to record video and easy pull

machine vision assets off of the μSD card.

 A SPI bus that can run up to 54Mbs allowing you to easily stream image data off the system to either the LCD

Shield, the WiFi Shield, or another microcontroller.

 An I2C Bus, CAN Bus, and an Asynchronous Serial Bus (TX/RX) for interfacing with other microcontrollers and

sensors.

 A 12-bit ADC and a 12-bit DAC.

 Three I/O pins for servo control.

 Interrupts and PWM on all I/O pins (there are 10 I/O pins on the board).

 And, an RGB LED and two high power 850nm IR LEDs.

The OV7725 image sensor is capable of taking 640x480 8-bit Grayscale images or 640x480 16-bit RGB565 images

at 60 FPS when the resolution is above 320x240 and 120 FPS when it is below. Most simple algorithms will run at

above 30 FPS. Your OpenMV Cam comes with a 2.8mm lens on a standard M12 lens mount. If you want to use more

specialized lenses with your OpenMV Cam you can easily buy and attach them yourself.

APPLICATIONS

The OpenMV Cam can be used for the following things currently (more in the future):

 Frame Differencing

 Color Tracking

 Marker Tracking

 Face Detection

 Eye Tracking

 Optical Flow

 QR Code Detection/Decoding

 Data Matrix Detection/Decoding

 Linear Barcode Decoding

 AprilTag Tracking

 Line Detection

 Circle Detection

 Rectangle Detection

 Template Matching

 Image Capture

 Video Recording