Features

* User-programmable with PLUS+1 GUIDE

(Graphical User Integrated Development

Environment)

* 24 pins: (2) individually keyed Deutsch® DTM

12 pin connectors

* ARM 32 bit Cortex-M3 running at 120 MHz

– 12 bit analog-to-digital converter

– 16 bit timers/counters

* FRAM non-volatile memory

* 8 inputs

– (5) universal (DIN/AIN/FreqIN) that are

user-defined as either:

Analog: with configurable ranges

0 to 5.25 Vdc (with over range protection)

or 0 to 36 Vdc;

Digital: pull up (5 Vdc), pull down (0 Vdc) or

pull to center (2.5 Vdc);

Frequency (timing): 1 Hz to 10 kHz

– (2) digital (DIN) configurable as pull up

(5 Vdc), pull down (0 Vdc)

– (1) fixed range analog (AIN/CAN shield)

0 to 5.25 Vdc or CAN shield pin

* 8 outputs

– (8) universal (PWMOUT/DOUT/PVGOUT)

that are user-defined as either:

Digital: (3 A), configurable as source or

sink;

PWM: (30 to 4000 Hz), configurable as

open or closed loop with current control;

Analog voltage: open loop PWM at 4000 Hz

– Any PWMOUT/DOUT/PVGOUT can be used

to provide reference power to one PVG

valve

* 9 to 36 Vdc power supply, monitored internally

* 1 CAN 2.0 B port, the fixed range analog input

can be configured as the shield pin

* Power supply for external sensors rated at

5 Vdc to 200 mA and regulated internally

* 2 LEDs under user control

* 3 mounting alternatives: stack, end, or side

* MC024-122 contains application key required

to run Danfoss developed machine control

application software

* CE compliant