丝印代码：N8；Bias Resistor Transistor

Bias Resistor Transistor NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network • Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist

TRANSISTOR:BRT

27W SWITCHING REGULATOR FOR AUTOMOTIVE APPLICATION

DESCRIPTION The GS-R218 is a switching voltage regulator that can deliver an output current of 1,5 A at 18 V when supplied by a car battery. The regulator uses a cigar lighter case with a coiled cord and it is protected against overloads and short circuits at the output (latching overload protec

Thyristors(Silicon Controlled Rectifiers)

. . . designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled, solid-state devices are needed. • Glass-Passivated Junctions • Blocking Voltage to 800 Volts • TO-220 Construction —

Silicon PNP Transistor Audio Power Output

Description: The NTE218 is ideal for use as a driver, switch and medium–power amplifier applications. This device features: Features: • Low Saturation Voltage – 0.6VCE(sat) @ IC = 1A • High Gain Characteristics – hFE @ IC = 250mA: 30–100 • Excellent Safe Area Limits

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE

Operational Amplifiers

文件：597.13 Kbytes Page：18 Pages