iButton Plastic Card Mounts

iButton DESCRIPTION The DS1982 1Kb Add-Only iButton is a rugged read/write data carrier that identifies and stores relevant information about the product or person to which it is attached. This information can be accessed with minimal hardware, for example, a single port pin of a microcontrolle

Real-Time Clock/calendar in binary format RTC iButton Over 10 years of operation

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

RTC iButton

Special Features •Real-time clock/calendar in binary format •Uses the same binary time/daterepresentation as the DS1994 but with1 second resolution •Clock accuracy is better than ±2 minutes permonth at +25°C •Operating temperature range from -40°C to+85°C •Over 10 years of operation Common

Serial Number iButton

General Description The DS1990A serial number iButton® is a rugged data carrier that serves as an electronic registration number for automatic identification. Data is transferred serially through the 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1990A h

RTC iButton

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

1024-Bit EEPROM iButton

General Description The DS1972 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each in a rugged iButton® package. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four memory pages can individually

Temperature iButton

iButton DESCRIPTION The DS1920 Temperature iButton provides 9-bit temperature readings which indicate the temperature of the device. Information is sent to/from the DS1920 over a 1-Wire interface. Power for reading, writing, and performing temperature conversions is derived from the data line

iButton塑料卡安装件

DS9093RA锁环是一种不锈钢扣件，用于将iButton®牢固地安装在任何打好孔的物体上，成本非常低廉。将iButton插入预先打好的孔中，直到法兰卡在孔口。将DS9093RA锁环套在iButton伸出过孔的壳体上安装即告完成。\n\n 可选件DS9093RB法兰扩展器是一种很薄的不锈钢垫片，用于扩大固定面积，增加iButton在一些很薄或很软的物体上安装时的牢固度。DS9093RB有一点拱起，可增大施加于穿孔物体上的夹持力。垫片拱起的一侧应面对iButton的法兰，平面应面对物体。 • 低成本固定件，用于将iButton固定在卡片或其它物体上。\n• 在预留孔上安装iButton\n• DS9093RA锁环牢固夹紧F5封装\n• DS9093RB法兰扩展器在必要时可增加法兰面积;

Hygrochron Temperature/Humidity Logger

文件：649.39 Kbytes Page：55 Pages

based iButtons branded with their respective character for optimum legibility

文件：56.73 Kbytes Page：2 Pages

DeepCover Secure Authenticator iButton with SHA-256

文件：599 Kbytes Page：13 Pages

iButton High-Capacity Temperature Logger with 122KB Data-Log Memory

文件：902.91 Kbytes Page：46 Pages

Logs Up to 2048 Consecutive Temperature Thermochron iButton

文件：675.51 Kbytes Page：42 Pages

High-Temperature Logger iButton with 8KB Data-Log Memory

文件：418.87 Kbytes Page：44 Pages

iButton Plastic Card Mounts

iButton DESCRIPTION The DS1982 1Kb Add-Only iButton is a rugged read/write data carrier that identifies and stores relevant information about the product or person to which it is attached. This information can be accessed with minimal hardware, for example, a single port pin of a microcontrolle

包装：散装 描述：IBUTTON LOCK 存储卡，模块 配件

Temperature iButton

iButton DESCRIPTION The DS1920 Temperature iButton provides 9-bit temperature readings which indicate the temperature of the device. Information is sent to/from the DS1920 over a 1-Wire interface. Power for reading, writing, and performing temperature conversions is derived from the data line

iButton Wall Mounts

DESCRIPTION The DS9093S and DS9093P allow the user to permanently attach an iButton to an object with one or two screws, or rivets. The plastic plate is designed with an inset that accommodates the flange of the F5 package and allows for flush mounting. A protective wall is provided along the sid

iButton Wall Mounts

DESCRIPTION The DS9093S and DS9093P allow the user to permanently attach an iButton to an object with one or two screws, or rivets. The plastic plate is designed with an inset that accommodates the flange of the F5 package and allows for flush mounting. A protective wall is provided along the sid

Integrated Circuit Diode Transistor Logic (DTL) Dual J-K Flip-Flop

Integrated Circuit Diode Transistor Logic (DTL) Dual J–K Flip–Flop