5- to 10-Cell Li Protector with Cell Balancing

General Description The DS2726 provides full charge and discharge protection for 5- to 10-cell lithium-ion (Li+) battery packs. The protection circuit monitors individual cell voltages to detect overvoltage and undervoltage conditions. Protection against discharge overcurrent and short-circuit cu

5节至10节Li+电池保护器，提供电池均衡

DS2726可为5至10节锂离子(Li+)电池组提供完备的充电和放电保护。保护电路分别监测各节电池电压，以检测是否处于过压和欠压状态。用户可通过外部电阻设置限流门限，以保护器件免受过放电电流和短路电流的损坏。采用高边P沟道保护FET，由片上10V FET驱动器驱动。电池均衡电路确保所有电池均衡充电。 \n• 可为5节至10节Li+电池组提供完全保护 \n• 引脚可编程，适合5至10节电池 \n• 内部电池均衡电路，旁路电流高达300mA \n• 引脚可编程VOV门限 \n• 引脚可编程电池均衡电压 \n• 过放电电流及短路电流可由外部电阻设置 \n• 过放电电流及短路电流超时延迟由外部电容设置 \n• 低功耗：60µA (典型值) \n• 低关断功耗：5µA (典型值) \n• 7mm x 7mm、32引脚TQFN无铅封装;

5-Cell to 10-Cell Li Protector with Cell Balancing

文件：290.21 Kbytes Page：16 Pages

5-Cell to 10-Cell Li Protector with Cell Balancing

文件：288.38 Kbytes Page：16 Pages

5- to 10-Cell Li Protector with Cell Balancing

General Description The DS2726 provides full charge and discharge protection for 5- to 10-cell lithium-ion (Li+) battery packs. The protection circuit monitors individual cell voltages to detect overvoltage and undervoltage conditions. Protection against discharge overcurrent and short-circuit cu

5- to 10-Cell Li Protector with Cell Balancing

General Description The DS2726 provides full charge and discharge protection for 5- to 10-cell lithium-ion (Li+) battery packs. The protection circuit monitors individual cell voltages to detect overvoltage and undervoltage conditions. Protection against discharge overcurrent and short-circuit cu

5- to 10-Cell Li Protector with Cell Balancing

General Description The DS2726 provides full charge and discharge protection for 5- to 10-cell lithium-ion (Li+) battery packs. The protection circuit monitors individual cell voltages to detect overvoltage and undervoltage conditions. Protection against discharge overcurrent and short-circuit cu

5-Cell to 10-Cell Li Protector with Cell Balancing

文件：290.21 Kbytes Page：16 Pages

5-Cell to 10-Cell Li Protector with Cell Balancing

文件：288.38 Kbytes Page：16 Pages

5-Cell to 10-Cell Li Protector with Cell Balancing

文件：290.21 Kbytes Page：16 Pages

5-Cell to 10-Cell Li Protector with Cell Balancing

文件：288.38 Kbytes Page：16 Pages

封装/外壳：32-WQFN 裸露焊盘 功能：多功能控制器 包装：卷带（TR） 描述：IC BAT MFUNC LI-ION 5-10C 32TQFN 集成电路（IC） 电池管理

封装/外壳：32-WQFN 裸露焊盘 功能：多功能控制器 包装：卷带（TR） 描述：IC BAT MFUNC LI-ION 5-10C 32TQFN 集成电路（IC） 电池管理

5-Cell to 10-Cell Li Protector with Cell Balancing

文件：288.38 Kbytes Page：16 Pages

5-Cell to 10-Cell Li Protector with Cell Balancing

文件：290.21 Kbytes Page：16 Pages

LOWDROP DUALPOWER OPERATIONAL AMPLIFIER

DESCRIPTION TheL2726 is a monolithic integrated circuit in SO-20 package intended for use as power operational amplifiers in a wide range of applications including servo amplifiers and power supplies. ■ OUTPUT CURRENT TO 1 A ■ OPERATES AT LOW VOLTAGES ■ SINGLE OR SPLIT SUPPLY ■ LARGE COMMON-M

1.6 GHz DIFFERENTIAL WIDE BAND AMPLIFIER SILICON BIPOLAR MONOLITHIC INTEGRATED CIRCUIT

DESCRIPTION The µPC2726T is a silicon microwave monolithic integrated circuit designed for miniature differenctial amplifier. This IC operates up to 1.6 GHz and therefore is suitable for BS tuner, mobile communication and measurement equipment applications. This IC can also use as differential os

High Speed Synchronous MOSFET Drivers

文件：159.39 Kbytes Page：9 Pages

High Speed Synchronous MOSFET Drivers

文件：159.39 Kbytes Page：9 Pages

High Speed Synchronous MOSFET Drivers

文件：159.39 Kbytes Page：9 Pages