Quad Loose Cell NiMH Charger

GENERAL DESCRIPTION The DS2714 is ideal for standalone charging of 1 to 4 AA or AAA NiMH “loose” cells. NiCd cells can also be charged. Temperature, voltage and charge time are monitored to provide proper fast charging control algorithms for Nickel Metal Hydride (NiMH) batteries. Battery tests ar

4节散装NiMH电池充电器

DS2714适用于独立的对1或4节AA或AAA型NiMH标准电池充电。同样，也能为NiCd电池充电。通过监控温度、电压和充电时间，可实现最佳的镍氢(NiMH)电池快速充电控制算法。电池测试包括检测失效或不匹配的电池，如碱性原电池。DS2714支持并联充电拓扑，对每节电池进行独立的检测和控制。 \n• 对1至4节NiMH电池充电 \n• 检测，并避免对碱性电池充电 \n• 对深度放电的电池进行预充电 \n• 对NiMH快速充电时，-ΔV终止检测灵敏度为2mV (典型值) \n• 监控电压、温度和时间，可作为辅助的终止方式以保证安全 \n• 使用恒流源作为充电电源 \n• 驱动PNP型调整元件 \n• 与集成型原边PWM控制器兼容 \n• 20引脚TSSOP封装;

Quad Loose Cell NiMH Charger

文件：440.08 Kbytes Page：12 Pages

Quad Loose Cell NiMH Charger

GENERAL DESCRIPTION The DS2714 is ideal for standalone charging of 1 to 4 AA or AAA NiMH “loose” cells. NiCd cells can also be charged. Temperature, voltage and charge time are monitored to provide proper fast charging control algorithms for Nickel Metal Hydride (NiMH) batteries. Battery tests ar

Quad Loose Cell NiMH Charger

GENERAL DESCRIPTION The DS2714 is ideal for standalone charging of 1 to 4 AA or AAA NiMH “loose” cells. NiCd cells can also be charged. Temperature, voltage and charge time are monitored to provide proper fast charging control algorithms for Nickel Metal Hydride (NiMH) batteries. Battery tests ar

Quad Loose Cell NiMH Charger

文件：440.08 Kbytes Page：12 Pages

Quad Loose Cell NiMH Charger

文件：440.08 Kbytes Page：12 Pages

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 包装：管件 描述：IC BATT CHG NIMH 1-4CELL 20TSSOP 集成电路（IC） 电池充电器

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 包装：管件 描述：IC BATT CHG NIMH 1-4CELL 20TSSOP 集成电路（IC） 电池充电器

Quad Loose Cell NiMH Charger

文件：440.08 Kbytes Page：12 Pages

Low-Voltage Single SPDT Analog Switch

DESCRIPTION The DG2714 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power, high speed (tON: 28 ns, tOFF: 12 ns), low on-resistance (rDS(on): 0.85 Ω) and small physical size (SC70), the DG2714 is ideal for port

Low-Voltage Single SPDT Analog Switch

DESCRIPTION The DG2714 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power, high speed (tON: 28 ns, tOFF: 12 ns), low on-resistance (rDS(on): 0.85 Ω) and small physical size (SC70), the DG2714 is ideal for port

Complementary Switch FET Drivers

文件：274.63 Kbytes Page：8 Pages

1.8 GHz LOW POWER CONSUMPTION WIDE BAND AMPLIFIER SILICON BIPOLAR MONOLITHIC INTEGRATED CIRCUIT

文件：186.35 Kbytes Page：6 Pages

LOW POWER CONSUMPTION SILICON MMIC AMPLIFIER

文件：81.49 Kbytes Page：6 Pages