T1 Isolation Stik

DESCRIPTION The DS2290 T1 Isolation Stik provides all the surge and isolation protection that is necessary to connect a piece of equipment to a T1 line. It offers a function similar to that provided by a Data Access Arrangement (DAA) when a modem is connected to a phone line. The DS2290 is FCC Pa

16/32-bit ARM microcontrollers with CAN, 10-bit ADC and external memory interface

General description The LPC2290 is based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation and embedded trace support. For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30 with minimal performance penalty. Features Key features ■ 16/32-bit A

2mm 횞 2mm PWM Boost Regulator with Internal Schotty Diode

General Description The MIC2290 is a 1.2MHz, PWM, boost-switching regulator housed in the small size 2mm × 2mm 8-pin MLF® package. The MIC2290 features an internal Schottky diode that reduces circuit board area and total solution cost. High power density is achieved with the MIC2290’s internal 34

2mm 횞 2mm PWM Boost Regulator with Internal Schotty Diode

General Description The MIC2290 is a 1.2MHz, PWM, boost-switching regulator housed in the small size 2mm × 2mm 8-pin MLF® package. The MIC2290 features an internal Schottky diode that reduces circuit board area and total solution cost. High power density is achieved with the MIC2290’s internal 34

DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS

description The TISP2290 is designed specifically for telephone equipment protection against lightning and transients induced by a.c. power lines. These devices will supress voltage transients between terminals A and C, B and C, and A and B. Transients are initially clipped by zener action until

Surface Mount Zener Diodes

文件：66.93 Kbytes Page：3 Pages