Hygrochron Temperature/Humidity Logger iButton with 8KB Data-Log Memory

General Description The iButton® temperature/humidity logger (DS1923) is a rugged, self-sufficient system that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit rea

Hygrochron Temperature/Humidity Logger iButton with 8kB Data Log Memory

iButton DESCRIPTION The DS1923 temperature/humidity logger iButton is a rugged, self-sufficient system that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readin

Hygrochron iButton器件，具有8KB数据记录存储器

iButton®温度/湿度记录器(DS1923)是坚固耐用的自供电系统，能够测量温度与/或湿度，并将测量结果记录在受保护的存储器内。记录频率由用户定义。总共可以保存8192个8位读数或4096个16位读数，这些记录以1秒至273小时的时间间隔等间隔采集。另外还有512字节的SRAM用于存储一些特定的应用信息，以及64字节用于存放校准数据。一项数据采集任务可以被编程为立即开始，或者在一个用户定义的延迟之后，或者在一次温度告警之后开始。对存储器和控制功能的访问可加密码保护。DS1923通过串行1-Wire®协议进行配置并与主机通信，仅需要单条数据引线和返回地。每个DS1923都由工厂光刻了一个唯一 • 数字湿度计以8位(0.6%RH)或12位(0.04%RH)的分辨率测量湿度\n• 工作范围：-20°C至+85°C；0至100%RH (见完整数据资料的安全操作范围)\n• 自动唤醒，测量温度与/或湿度，并以8位或16位格式在8KB数据记录存储器中保存数据\n• 数字温度计以8位(0.5°C)或11位(0.0625°C)分辨率测量温度\n• 利用软件修正，-10°C至+65°C范围内的温度精度优于±0.5°C\n• 内置湿度传感器实现温度与湿度的同步记录\n• 电容式聚合体湿度测量单元\n• 防水滤波器保护传感器避免灰尘、污垢、潮湿与污染\n• 采样间隔从1秒至27;

Hygrochron Temperature/Humidity Logger iButton with 8kB Data Log Memory

iButton DESCRIPTION The DS1923 temperature/humidity logger iButton is a rugged, self-sufficient system that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readin

Hygrochron Temperature/Humidity Logger iButton with 8KB Data-Log Memory

General Description The iButton® temperature/humidity logger (DS1923) is a rugged, self-sufficient system that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit rea

Hygrochron Temperature/Humidity Logger iButton with 8kB Data Log Memory

文件：350.51 Kbytes Page：53 Pages

Hygrochron Temperature/Humidity Logger

文件：649.39 Kbytes Page：55 Pages

Hygrochron Temperature/Humidity Logger iButton with 8kB Data Log Memory

文件：350.51 Kbytes Page：53 Pages

包装：管件 描述：IBUTTON TEMP/HUMIDITY LOGGER F5 存储卡，模块 专用

描述：MEMORY CARD NVSRAM 512B 存储卡，模块 存储卡

RDS / RBDS decoder

The BU1923 and BU1923F are RDS / RBDS decoders that employ a digital PLL and have a built-in anti-aliasing filter and an eight-stage BPF (switched-capacitor filter). Linear CMOS circuitry is used for low power consumption. Features 1) Low current. 2) Two-stage anti-aliasing filter (LPF).

ENHANCED PERFORMANCE SURFACE MOUNT EPSM PACKAGED DEVICES

DESCRIPTION Our EPSM packaged devices are designed for the most demanding commercial and Military requirements where the inconsistent performance inherent in plastic surface mount packages cannot be tolerated. These package styles extend the surface mount construction format to 6 GHz for high per

TAPE CARRIER SMALL SIGNAL GaAs FET????

DESCRIPTION The MGF1923, low noise GaAs FET with an N-Channel Schottky gate, is designed for use in S to Ku band amplifiers. The MGF1923 is mounted in the super 12 tape. FEATURES ● High linear power gain GLP = 11dB (Typ.) @ 12GHz ● High output at power 1dB gain compression P1dB =

3 Terminal Negative Voltage Regulator -18V, 1.5A

Description: The NTE1923 is a negative 3–terminal voltage regulator in a TO3 type package suitable for numerous applications including local, on–card regulation requiring up to 1.5A. This device features thermal shutdown and current limiting making the NTE1920 remarkably rugged. Although des