Multisupply Micromonitor

DESCRIPTION The DS1831 multisupply monitor and reset monitors up to four system voltages: 5V supply, 3.3V (or 3V) supply, and two additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3V input or the 5V input. One of these

多电源MicroMonitor™

DS1831多电源微监控器和复位电路监测多达4个系统电压：5V电源，3.3V (或3V)电源，以及两个额外的用户可配置电压监测器。DS1831可从较高的3.3V或5V电源输入中获得内部工作电源。为了使器件工作,这些输入中至少有一路必须大于1V。提供按钮(手动复位)功能，分别用于5V和3.3V手动复位，或通过主按钮输入，使所有复位输出有效。DS1813A用一个看门狗取代了一个基准比较器和主按钮输入，DS1831B用最新复位状态输出取代了3.3V按钮复位输入。\n\n TOL和TD输入引脚允许用户配置DS1831，以适应于多种应用。TOL输入引脚配置特定输出的电源容差值，TD输入引脚配置 • 5V上电复位\n• 3.3 (或3V)上电复位\n• 两个独立输出的基准比较器，用于监测其它电源\n• 内部电源来自较高的IN5V电源输入或IN3.3V电源输入\n• 尤其适合于设计多电源的供电系统\n• 电源瞬变期间，复位输出有效\n• 复位输入按钮，用于系统复位\n• 10ms、100ms和1s的用户可配置复位保持时间\n• 用于软件监测的看门狗定时器(DS1831A)\n• 精密的温度补偿电压基准和电压检测\n• 16引脚DIP封装和16引脚150mil的SO封装\n• 工作温度范围-40°C至+85°C;

封装/外壳：16-DIP（0.300"，7.62mm） 包装：管件 描述：IC SUPERVISOR 4 CHANNEL 16DIP 集成电路（IC） 监控器

Multisupply Micromonitor

DESCRIPTION The DS1831 multisupply monitor and reset monitors up to four system voltages: 5V supply, 3.3V (or 3V) supply, and two additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3V input or the 5V input. One of these

Multisupply Micromonitor

DESCRIPTION The DS1831 multisupply monitor and reset monitors up to four system voltages: 5V supply, 3.3V (or 3V) supply, and two additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3V input or the 5V input. One of these

Multisupply Micromonitor

DESCRIPTION The DS1831 multisupply monitor and reset monitors up to four system voltages: 5V supply, 3.3V (or 3V) supply, and two additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3V input or the 5V input. One of these

多电源MicroMonitor™

DS1831多电源微监控器和复位电路监测多达4个系统电压：5V电源，3.3V (或3V)电源，以及两个额外的用户可配置电压监测器。DS1831可从较高的3.3V或5V电源输入中获得内部工作电源。为了使器件工作,这些输入中至少有一路必须大于1V。提供按钮(手动复位)功能，分别用于5V和3.3V手动复位，或通过主按钮输入，使所有复位输出有效。DS1813A用一个看门狗取代了一个基准比较器和主按钮输入，DS1831B用最新复位状态输出取代了3.3V按钮复位输入。\nTOL和TD输入引脚允许用户配置DS1831，以适应于多种应用。TOL输入引脚配置特定输出的电源容差值，TD输入引脚配置复位时间延时。 ·5V上电复位\n·3.3 (或3V)上电复位\n·两个独立输出的基准比较器，用于监测其它电源\n·内部电源来自较高的IN5V电源输入或IN3.3V电源输入\n·尤其适合于设计多电源的供电系统\n·电源瞬变期间，复位输出有效\n·复位输入按钮，用于系统复位\n·10ms、100ms和1s的用户可配置复位保持时间\n·用于软件监测的看门狗定时器(DS1831A)\n·精密的温度补偿电压基准和电压检测\n·16引脚DIP封装和16引脚150mil的SO封装\n·工作温度范围-40°C至+85°C;

Multisupply Micromonitor

DESCRIPTION The DS1831 multisupply monitor and reset monitors up to four system voltages: 5V supply, 3.3V (or 3V) supply, and two additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3V input or the 5V input. One of these

3.3V/2.5V Multi-Supply MicroMonitor

DESCRIPTION The DS1831C Multi-Supply Monitor & Reset monitors up to 4 system voltages: 2.5 volt supply, 3.3 (or 3) volt supply, and 2 additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3 volt input or the 2.5 volt in

3.3V/2.5V、多电源MicroMonitor

DS1831C多电源微监控器和复位电路监测多达4个系统电压：2.5V电源，3.3V (或3V)电源，以及两个额外的用户可配置电压监测器。DS1831可从较高的3.3V或2.5V电源输入中获得内部工作电源。为了使器件工作,这些输入中至少有一路必须大于1V。提供按钮(手动复位)功能，分别用于2.5V和3.3V手动复位，或通过主按钮输入，使所有复位输出有效。DS1813D用一个看门狗取代了一个基准比较器和主按钮输入，DS1831E用最新复位状态输出取代了3.3V /PBRST按钮复位输入。\n\n TOL和TD输入引脚允许用户配置DS1831，以适应于多种应用。TOL输入引脚配置特定输出的 • 2.5V上电复位\n• 3.3 (或3V)上电复位\n• 两个独立输出的基准比较器，用于监测其它电源\n• 内部电源来自较高的IN2.5V电源输入或IN3.3V电源输入\n• 尤其适合于设计多电源的供电系统\n• 电源瞬变期间，复位输出有效\n• 复位输入按钮，用于系统复位\n• 10ms、100ms和1s的用户可配置复位保持时间\n• 用于软件监测的看门狗定时器(DS1831D)\n• 精密的温度补偿电压基准和电压检测\n• 16引脚DIP封装和16引脚150mil的SO封装\n• 工作温度范围-40°C至+85°C;

3.3V/2.5V Multi-Supply MicroMonitor

DESCRIPTION The DS1831C Multi-Supply Monitor & Reset monitors up to 4 system voltages: 2.5 volt supply, 3.3 (or 3) volt supply, and 2 additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3 volt input or the 2.5 volt in

3.3V/2.5V Multi-Supply MicroMonitor

DESCRIPTION The DS1831C Multi-Supply Monitor & Reset monitors up to 4 system voltages: 2.5 volt supply, 3.3 (or 3) volt supply, and 2 additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3 volt input or the 2.5 volt in

3.3V/2.5V Multi-Supply MicroMonitor

DESCRIPTION The DS1831C Multi-Supply Monitor & Reset monitors up to 4 system voltages: 2.5 volt supply, 3.3 (or 3) volt supply, and 2 additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3 volt input or the 2.5 volt in

3.3V/2.5V Multi-Supply MicroMonitor

DESCRIPTION The DS1831C Multi-Supply Monitor & Reset monitors up to 4 system voltages: 2.5 volt supply, 3.3 (or 3) volt supply, and 2 additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3 volt input or the 2.5 volt in

3.3V/2.5V Multi-Supply MicroMonitor

DESCRIPTION The DS1831C Multi-Supply Monitor & Reset monitors up to 4 system voltages: 2.5 volt supply, 3.3 (or 3) volt supply, and 2 additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3 volt input or the 2.5 volt in

Multisupply Micromonitor

DESCRIPTION The DS1831 multisupply monitor and reset monitors up to four system voltages: 5V supply, 3.3V (or 3V) supply, and two additional user configurable voltage monitors. DS1831 power for internal operation comes from the higher voltage level of the 3.3V input or the 5V input. One of these

封装/外壳：16-DIP（0.300"，7.62mm） 包装：管件 描述：IC SUPERVISOR 4 CHANNEL 16DIP 集成电路（IC） 监控器

3.3V/2.5V Multisupply MicroMonitor

文件：197.32 Kbytes Page：15 Pages

3.3V/2.5V Multisupply MicroMonitor

文件：197.32 Kbytes Page：15 Pages

3.3V/2.5V Multisupply MicroMonitor

文件：197.32 Kbytes Page：15 Pages

64K x 32 Static RAM Module

Functional Description The CYM1831 is a high-performance 2-Mbit static RAM module organized as 64K words by 32 bits. This module is constructed from eight 64K x 4 SRAMs in SOJ packages mounted on an epoxy laminate board with pins. Four chip selects (CS1, CS2, CS3, and CS4) are used to independent

Support for AM Stereo and Electronic Tuning Single Chip Music Center IC (AM/FM IF MPX) for Use in Compact Radio/Casette Products

Support for AM stereo and electronic tuning single chip music center IC (AM/FM IF + MPX) for use in compact radio/casette products

Low-Saturation Bidirectional Motor Driver for Low-Voltage Applications?

Overview The LB1831M is a dual low-saturation bidirectional motor driver IC for use in low-voltage applications. It is especially suited for use in compact low-voltage motors in portable equipment such as printer, FDD, camera. Features • Capable of being operated from a low voltage (2.5V min).

3A, 1MHz, Low-Voltage, Step-Down Regulators with Synchronous Rectification and Internal Switches

General Description The MAX1830/MAX1831 constant-off-time, pulse-width-modulated (PWM) step-down DC-DC converters are ideal for use in 5V and 3.3V to low-voltage conversion necessary in notebook and subnotebook computers. These devices feature internal synchronous rectification for high efficienc

Integrated Circuit Dual Audio Power Amplifier, 5.8W (19W BTL)

Description: The NTE1830 and NTE1830 are dual audio power amplifiers in a 12–Lead DIP type package for use in consumer applications. Designed for high power, low distortion, and low noise, these devices contain various types of protection circuitry making them suitable for high performance car