Analog CMOS Latchable Multiplexers

Description The DG526, DG527, DG528, and DG529 are CMOS Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers. Each device has on-chip address and control latches to simplify design in microprocessor based applications. Features • Direct RESET • TTL and CMOS Compatible Address and Enable In

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

DESCRIPTION The DG528 is an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined by a 3-bit binary address (A0, A1, A2). DG529, a 4-channel dual analog multiplexer, is designed to connect one of four differential inputs to a common dif

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

FEATURES • Low RDS(on): 270  • 44 V Power Supply Rating • On-Board Address Latches • Break-Before-Make • Low Leakage - ID(on): 30 pA BENEFITS • Improved System Accuracy • Microporcessor Bus Compatible • Easily Interfaced • Reduced Crosstalk APPLICATIONS • Data Acquisition Systems

8通道、带锁存的多路复用器

Maxim的DG528/DG529均为单片8通道CMOS多路复用器，具有板载地址和控制锁存器，可为基于微处理器的应用简化设计并减少电路板空间。DG528为单端1:8复用器，而DG529为差分2:8复用器。这些器件可以用作多路复用器或解复用器。\n\n DG528/DG529为先开后合式开关，以防止输入信号发生瞬时短路。每款器件均采用双电源（±4.5V至±20V）或单电源（+5V至+30V）供电。所有的逻辑输入均兼容TTL和CMOS。Maxim DG528/DG529与行业标准DG528/DG529引脚和电气兼容。\n\n   • 低功耗、单片CMOS设计\n\n• 板载地址锁存器\n\n• 先开后合式输入开关\n\n• TTL和CMOS逻辑兼容\n\n• 兼容微处理器总线\n\n• r< 400Ω\n\n• 与行业标准引脚和电气兼容;

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

文件：176.13 Kbytes Page：12 Pages

Analog CMOS Latchable Multiplexers

Description The DG526, DG527, DG528, and DG529 are CMOS Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers. Each device has on-chip address and control latches to simplify design in microprocessor based applications. Features • Direct RESET • TTL and CMOS Compatible Address and Enable In

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

FEATURES • Low RDS(on): 270  • 44 V Power Supply Rating • On-Board Address Latches • Break-Before-Make • Low Leakage - ID(on): 30 pA BENEFITS • Improved System Accuracy • Microporcessor Bus Compatible • Easily Interfaced • Reduced Crosstalk APPLICATIONS • Data Acquisition Systems

Analog CMOS Latchable Multiplexers

Description The DG526, DG527, DG528, and DG529 are CMOS Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers. Each device has on-chip address and control latches to simplify design in microprocessor based applications. Features • Direct RESET • TTL and CMOS Compatible Address and Enable In

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

FEATURES • Low RDS(on): 270  • 44 V Power Supply Rating • On-Board Address Latches • Break-Before-Make • Low Leakage - ID(on): 30 pA BENEFITS • Improved System Accuracy • Microporcessor Bus Compatible • Easily Interfaced • Reduced Crosstalk APPLICATIONS • Data Acquisition Systems

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

Analog CMOS Latchable Multiplexers

Description The DG526, DG527, DG528, and DG529 are CMOS Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers. Each device has on-chip address and control latches to simplify design in microprocessor based applications. Features • Direct RESET • TTL and CMOS Compatible Address and Enable In

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

FEATURES • Low RDS(on): 270  • 44 V Power Supply Rating • On-Board Address Latches • Break-Before-Make • Low Leakage - ID(on): 30 pA BENEFITS • Improved System Accuracy • Microporcessor Bus Compatible • Easily Interfaced • Reduced Crosstalk APPLICATIONS • Data Acquisition Systems

Analog CMOS Latchable Multiplexers

Description The DG526, DG527, DG528, and DG529 are CMOS Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers. Each device has on-chip address and control latches to simplify design in microprocessor based applications. Features • Direct RESET • TTL and CMOS Compatible Address and Enable In

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

Analog CMOS Latchable Multiplexers

Description The DG526, DG527, DG528, and DG529 are CMOS Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers. Each device has on-chip address and control latches to simplify design in microprocessor based applications. Features • Direct RESET • TTL and CMOS Compatible Address and Enable In

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

FEATURES • Low RDS(on): 270  • 44 V Power Supply Rating • On-Board Address Latches • Break-Before-Make • Low Leakage - ID(on): 30 pA BENEFITS • Improved System Accuracy • Microporcessor Bus Compatible • Easily Interfaced • Reduced Crosstalk APPLICATIONS • Data Acquisition Systems

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

Analog CMOS Latchable Multiplexers

Description The DG526, DG527, DG528, and DG529 are CMOS Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers. Each device has on-chip address and control latches to simplify design in microprocessor based applications. Features • Direct RESET • TTL and CMOS Compatible Address and Enable In

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

Analog CMOS Latchable Multiplexers

Description The DG526, DG527, DG528, and DG529 are CMOS Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers. Each device has on-chip address and control latches to simplify design in microprocessor based applications. Features • Direct RESET • TTL and CMOS Compatible Address and Enable In

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

8-Channel Latchable Multiplexers

General Description Maxim’s DG528/DG529 are monolithic, 8-channel, CMOS multiplexers with on-board address and control latches that simplify design and reduce board space in microprocessor-based applications. The DG528 is a single-ended, 1-of-8 multiplexer, while the DG529 is a differential, 2-of

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

文件：176.13 Kbytes Page：12 Pages

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

文件：176.13 Kbytes Page：12 Pages

Latchable Single 8-Ch/Differential 4-Ch Analog Multiplexers

文件：176.13 Kbytes Page：12 Pages

CMOS LATCHED 4/8 CHANNEL ANALOG MULTIPLEXERS

GENERAL DESCRIPTION The ADG528A and ADG529A are CMOS monolithic analog multiplexers with eight channels and four dual channels, respectively. On-chip latches facilitate microprocessor interfacing. The ADG528A switches one of eight inputs to a common output, depending on the state of three binary

CMOS LATCHED 4/8 CHANNEL ANALOG MULTIPLEXERS

GENERAL DESCRIPTION The ADG528A and ADG529A are CMOS monolithic analog multiplexers with eight channels and four dual channels, respectively. On-chip latches facilitate microprocessor interfacing. The ADG528A switches one of eight inputs to a common output, depending on the state of three binary

Voltage comparator

DESCRIPTION The NE529 is a high-speed analog voltage comparator which, for the first time, mates state-of-the-art Schottky diode technology with the conventional linear process. This allows simultaneous fabrication of high-speed TTL gates with a precision linear amplifier on a single monolithic

Voltage comparator

DESCRIPTION The NE529 is a high-speed analog voltage comparator which, for the first time, mates state-of-the-art Schottky diode technology with the conventional linear process. This allows simultaneous fabrication of high-speed TTL gates with a precision linear amplifier on a single monolithic

Voltage comparator

DESCRIPTION The NE529 is a high-speed analog voltage comparator which, for the first time, mates state-of-the-art Schottky diode technology with the conventional linear process. This allows simultaneous fabrication of high-speed TTL gates with a precision linear amplifier on a single monolithic