I.S. SIL2 Load Cell/Strain Gauge Bridge Converter

FEATURES SIL 2 / SC 3 Input from Zone 0 Installation in Zone 2 Strain Gauge Bridge Isolated Converter Up to four 350 Ω load cells in parallel 0/4-20 mA sink/source output current Modbus RTU RS-485 for monitor & configuration Field Automatic Calibration Fully programmable operating paramet

ZENER DIODES

• ZENER DIODES • LEADLESS PACKAGE FOR SURFACE MOUNT • DOUBLE PLUG CONSTRUCTION • METALLURGICALLY BONDED

Voltage regulator diodes

Low-power voltage regulator diodes in small hermetically sealed glass SOD80C SMD packages. The series consists of 43 types with nominal working voltages from 3.0 to 75 V. FEATURES • Total power dissipation : max. 500 mW • Tolerance series:±5 • Working voltage range : nom. 3.0 to 75 V

10 and 1 page intelligent teletext decoders

GENERAL DESCRIPTION The SAA5264 is a single-chip ten page 625-line World System Teletext decoder with a high-level command interface, and is SAFARI compatible. FEATURES The following features apply to both SAA5264 and SAA5265: • Complete 625 line teletext decoder in one chip reduces printed ci

10 and 1 page intelligent teletext decoders

GENERAL DESCRIPTION The SAA5264 is a single-chip ten page 625-line World System Teletext decoder with a high-level command interface, and is SAFARI compatible. FEATURES The following features apply to both SAA5264 and SAA5265: • Complete 625 line teletext decoder in one chip reduces printed ci

Silicon Z-Diodes

Features ● Very sharp reverse characteristic ● Very high stability ● Electrical data identical with the devices 1N5221B...1N5267B ● Low reverse current level ● VZ–tolerance ± 5 Applications    Voltage stabilization