Features

Aggregate data rate of up to 1.2 Gbps

A 5 GHz 2x2:2 802.11ac radio and a 2.4 GHz 2x2:2 802.11n radio

offer a combined aggregate dual-band data rate of 1.2 Gbps.

Technologies like transmit beamforming and enhanced receive

sensitivity allow the MR32 to support a higher client density than

typical enterprise-class access points, resulting in fewer required

APs for a given deployment. Band steering further enhances overall

throughput, by moving 5 GHz-capable clients to the 5 GHz radio,

maximizing the capacity in the 2.4 GHz range for older 802.11b/g

clients.

Dedicated third radio delivers 24x7 wireless security and

RF analytics

The MR32’s sophisticated, dedicated dual-band third radio scans

the environment continuously, characterizing RF interference and

containing wireless threats like rogue access points. No more need

to choose between wireless security, advanced RF analysis, and

serving client data: a dedicated third radio means that all three

occur in real-time, without any impact to client traffic or

AP throughput.

Bluetooth low energy Beacon and scanning

An integrated Bluetooth low energy radio provides seamless

deployment of BLE Beacon functionality and effortless visibility of

BLE devices within range of the AP. The MR32 enables the next

generation of location-aware applications and engagement right out

of the box.

Automatic cloud-based RF optimization

The MR32’s sophisticated, automated RF optimization means that

there is no need for the dedicated hardware and RF expertise

typically required to tune a wireless network. The real-time fullspectrum RF analysis data collected by the dedicated third radio is

continuously fed back to the Meraki cloud. The Meraki cloud then

automatically tunes the MR32’s channel selection, transmit power,

and client connection settings for optimal performance under the

most challenging RF conditions.

Secure wireless environments using 24x7 Air Marshal

No longer choose between a wireless intrusion prevention system

(WIPS) and serving client data: thanks to the dedicated third radio,

Air Marshal, a highly optimized built-in WIPS, scans continuously for

threats and remediates them as commanded, all without disrupting

client service. Alarms and optional auto-containment of rogue APs

are configured via flexible remediation policies, ensuring optimal

security and performance in even the most challenging wireless

environments.

Integrated enterprise security and guest access

The MR32 features integrated, easy-to-use security technologies

to provide secure connectivity for employees and guests alike.

Advanced security features such as AES hardware-based

encryption and WPA2-Enterprise authentication with 802.1X and

Active Directory integration provide wire-like security while still

being easy to configure. One-click guest isolation provides secure,

Internet-only access for visitors. Our policy firewall (Identity Policy

Manager) enables group or device-based, granular access policy

control. Meraki Teleworker VPN makes it easy to extend the

corporate LAN to remote sites, without requiring all clients and

devices to have client VPN software. PCI compliance reports

check network settings against PCI requirements to simplify secure

retail deployments.

Application-aware traffic shaping

The MR32 includes an integrated layer 7 packet inspection,

classification, and control engine, enabling you to set QoS policies

based on traffic type. Also included is integrated support for

Wireless Multi Media (WMM), 802.1p, and DSCP. Prioritize your

mission critical applications, while setting limits on recreational

traffic, e.g., peer-to-peer and video streaming.

Low-profile, environmentally friendly design

Despite its robust feature set, the MR32 is packaged in a sleek,

low-profile enclosure that blends seamlessly into any environment.

Energy-saving components and intelligent power management

techniques deliver best-in-class energy efficient performance and

mean that pollution, material utilization, and your electric bill are

kept to a minimum.

High performance mesh

The MR32’s advanced mesh technologies, like multi-channel

routing protocols and multiple gateway support, make it possible

to cover hard-to-wire areas and improve network resilience. In the

event of a switch or cable failure, the MR32 will automatically revert

to mesh mode.

Self-configuring, self-optimizing, self-healing

When plugged in, the MR32 automatically connects to the Meraki

cloud, downloads its configuration, and joins the appropriate

network. The MR32 then self-optimizes, determining the ideal

channel, transmit power, and client connection parameters. As

necessary, it will also self-heal, responding automatically to switch

failures and other errors.