FEATURES GENERAL DESCRIPTION

 Compliant with DisplayPort Specification version 1.2a

and Embedded DisplayPort (eDP) Specification version

1.3

 Up to 4 Main Link Lanes at either 1.62Gb/s or 2.7Gb/s

(HBR) link rate supported

 Support color depth 6/8/10/12bits

 HDMI transmitter compliant with HDMI specification

version 1.4b and DVI specification version 1.0

 HDMI transmitter supports up to 300 MHz TMDS

clock, and supports up to 3.0Gbps data rate for video

timing of 1920x1080@120Hz or 4Kx2K@30Hz

 Supports Enhanced Framing Mode

 Fast and full Link Training for embedded DisplayPort

system

 Support eDP Authentication: Alternative Scramble Seed

Reset and Alternative Framing

 DisplayPort receiver auto equalization supported for the

compensation of input signal attenuation

 Support Spread Spectrum Clocking (de-spreading) for

EMI reduction

 HDCP engine compliant with HDCP 1.4 specification

with internal HDCP Keys

 On-chip Audio Decoder which support 8 channel Audio

input from DP Rx and output from HDMI Tx with

sample rate up to 192KHz

 Embedded MCU to handle the control logic

 Support device boot up by loading firmware from On

Chip Flash automatically

 Integrated EDID Buffer

 2 work modes: connect 27MHz crystal, inject 27MHz

clock

 DP input detection supported

 Support Auto Power Saving mode and low stand-by

current

 DP AUX channel and IIC slave interface are available

for firmware update and debug

 Low power architecture

 RoHS compliant and Halogen free package

 HBM 4KV ESD Performance

 Offered in 48-Pin QFN package (6 x 6 mm)

APPLICATION

 Notbook/Ultrabook

 Tablet Device

 Handheld/Portable Device

 DP to HDMI cable

 DP to HDMI Adapter/Docking Station

Chrontel’s CH7525 is a low-cost, low-power

semiconductor device that translates the DisplayPort

signal to HDMI/DVI. This innovative DisplayPort

receiver with an integrated HDMI Transmitter is specially

designed to target the notebook/ultrabook, tablet device

and PC market segments. Through the CH7525’s

advanced decoding / encoding algorithm, the input

DisplayPort high-speed serialized multimedia data can be

seamlessly converted to HDMI/DVI output.

The CH7525’s DP/eDP receiver is compliant with the

DisplayPort Specification 1.2a and the Embedded

DisplayPort Specification version 1.3. With internal

HDCP key Integrated, the device support HDCP 1.4

specifications. In the device’s receiver block, which

supports four DisplayPort Main Link Lanes input with

data rate running at either 1.62Gb/s or 2.7Gb/s, can accept

RGB digital formats in either 18 bit or 24-bit, and

converted the input signal to HDMI output up to

1920x1080@120Hz or 3840x2160@30Hz. Leveraging

the DisplayPort’s unique source/sink “Link Training”

routine, the CH7525 is capable of instantly bring up the

video display to the HDMI/DVI TV/Monitor when the

initialization process is completed.

The CH7525 also supports up to 8-channel audio input

from DP Rx and output from HDMI Tx with sample rate

up to 192 KHz. Available audio bandwidth depends on

the pixel clock frequency, the video format timing, and

whether or not content protection re-synchronization is

needed.

With sophisticated MCU and the On Chip Flash, CH7525

support auto-boot and EDID buffer. Leveraging the

firmware auto-loaded from Flash, CH7525 can support

DP input detection and determine to enter into Power

saving mode automatically.