丝印代码：CS6800；10-BIT FET BUS SWITCH WITH PRECHARGED OUTPUTS AND SCHOTTKY DIODE CLAMPING

5-W Switch Connection Between Two Ports TTL-Compatible Input Levels Outputs Are Precharged by Bias Voltage to Minimize Signal Distortion During Live Insertion Schottky Diodes on the I/Os to Clamp Undershoots up to –2 V description The SN74CBTS6800 provides ten bits of high-speed TTL-com

丝印代码：CS6800；10-BIT FET BUS SWITCH WITH PRECHARGED OUTPUTS AND SCHOTTKY DIODE CLAMPING

5-W Switch Connection Between Two Ports TTL-Compatible Input Levels Outputs Are Precharged by Bias Voltage to Minimize Signal Distortion During Live Insertion Schottky Diodes on the I/Os to Clamp Undershoots up to –2 V description The SN74CBTS6800 provides ten bits of high-speed TTL-com

丝印代码：CS6800；10-BIT FET BUS SWITCH WITH PRECHARGED OUTPUTS AND SCHOTTKY DIODE CLAMPING

5-W Switch Connection Between Two Ports TTL-Compatible Input Levels Outputs Are Precharged by Bias Voltage to Minimize Signal Distortion During Live Insertion Schottky Diodes on the I/Os to Clamp Undershoots up to –2 V description The SN74CBTS6800 provides ten bits of high-speed TTL-com

丝印代码：CS6800；10-BIT FET BUS SWITCH WITH PRECHARGED OUTPUTS AND SCHOTTKY DIODE CLAMPING

5-W Switch Connection Between Two Ports TTL-Compatible Input Levels Outputs Are Precharged by Bias Voltage to Minimize Signal Distortion During Live Insertion Schottky Diodes on the I/Os to Clamp Undershoots up to –2 V description The SN74CBTS6800 provides ten bits of high-speed TTL-com

6000 Series Full Face Respirators

Main Features The 6000 Series Full Face Respirators are used with twin lightweight filters which are fitted by a simple bayonet attachment system, providing an economical and flexible choice. The Respirators can also be used with the 3M S-200 Supplied-Air System for increased convenience and flex

8-BIT MICROPROCESSING UNIT (MPU)

8-BIT MICROPROCESSING UNIT (MPU) The MC6800 is a monolithic 8-bit microprocessor forming the central control function for Motorola’s M68~ family. Compatible with TTL, the MC6B~, as with all M6800 system parts, requires only one + 5.O-volt power supply, and no external TTL devices for bus interf

F (M/F) Right Angle, F(M/F), F (F/F) Bulkhead, F (F) PCB

Features • True 75 Ω BNC adapters. • Gold-plated (15 micro–inches) contacts. • BNC insulation material is PTFE (not delrin).

DABiC-5 Latched Sink Drivers

DABiC-5 Latched Sink Drivers The A6800 and A6801 latched-input BiMOS ICs merge high-current, high-voltage outputs with CMOS logic. The CMOS input section consists of 4 or 8 data (‘D’ type) latches with associated common CLEAR, STROBE, and OUTPUT ENABLE circuitry. The power outputs are bipolar NPN

0.5mmPitch RA SMT Dual-sided contact One- touch lock

文件：177.66 Kbytes Page：1 Pages