High-Current Switching Applications

High-Current Switching Applications Features • Adoption of MBIT process. • High current capacitance. • Low collector-to-emitter saturation voltage. • High-speed switching. • Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). • High allowable power diss

Bipolar Transistor, (-)50V, (-)3A, Low VCE(sat), (PNP)NPN Single CPH6

CPH6123 is Bipolar Transistor, (-)50V, (-)3A, Low VCE(sat), (PNP)NPN Single CPH6 for High-Current Switching Applications. • Adoption of MBIT process\n• Low collector-to-emitter saturation voltage\n• Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm)\n• High allowable power dissipation;

Bipolar Transistor (.)50V, (.)3A, Low VCE(sat), (PNP)NPN Single CPH6

Features • Adoption of MBIT process • Large current capacity • Low collector-to-emitter saturation voltage • High-speed switching • Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) • High allowable power dissipation Applications • DC-DC converters, r

Bipolar Transistor

文件：602.74 Kbytes Page：8 Pages

封装/外壳：SC-74，SOT-457 包装：散装 描述：TRANS PNP 50V 3A 6CPH 分立半导体产品 晶体管 - 双极性晶体管（BJT）- 单个

Speech network IC with ALC

■ Features • Wide supply voltage operation range of VCC = 2.4 V to 6.0 V • Small current consumption of ICC = 500 µA • Reduction of a bad effect by the external noise thanks to a package for a rear side mounting.

Speech network IC with ALC

■ Features • Wide supply voltage operation range of VCC = 2.4 V to 6.0 V • Small current consumption of ICC = 500 µA • Reduction of a bad effect by the external noise thanks to a package for a rear side mounting.

Single Supply Integrated Current Limiting Controller

The ISL6121 is a single supply Overcurrent (OC) fault protection IC for 2.5V to 5V applications where 2A current limiting is desired. This device features internal current monitoring and limiting along with a 50mΩ integrated power switch and a current limited time out to latch-off feature for syst

100 V DMOS SWITCHES

DESCRIPTION Realized with the Multipower-BCD mixed bipolar/CMOS/DMOS process, the L6122/23monolithic three DMOS switch is designed for high current, high voltage switching applications. Each of the three switches is controlled by a logic input and all three are controlled by a common enable input

Silicon PNP epitaxial planer transistor

Silicon PNP epitaxial planer transistor For digital circuits ■ Features ● Costs can be reduced through downsizing of the equipment and reduction of the number of parts. ● MT-1 type package, allowing supply with the radial taping.