100V, 2.5Arms/ADC Single-Pole Normally Open Power SIP Relay

Features • Handle Load Currents Up to 2.5ADC/Arms • 2500Vrms Input/Output Isolation • Power SIP Package • High Reliability • Low Drive Power Requirements • No EMI/RFI Generation Applications • Industrial Controls • Motor Control • Robotics • Medical Equipment—Patient/Equipment Isolati

Power Relays

·Handles loads up to 9A\n·Voltage ratings up to 1000VP\n·Low On-resistance\n·Non-conductive thermal pad for heat sink applications\n·Industry standard 4-Pin SIP package\n·Low input control current\n·Low thermal impedances:\n0.30°C/W - ISOPLUS-2640.35°C/W - i4-PAC1.5°C/W - Power SIP;

Machine Insertable, Wave Solderable

文件：107.39 Kbytes Page：6 Pages

封装/外壳：8-SIP，4 引线 包装：管件 描述：SSR RELAY SPST-NO 2.5A 0-100V 继电器 固态继电器

封装/外壳：8-SIP，4 引线 包装：散装 描述：SSR RELAY SPST-NO 2.5A 0-100V 继电器 固态继电器

Power SIP Relay

文件：467.86 Kbytes Page：5 Pages

Power SIP Relay

文件：102.18 Kbytes Page：5 Pages

OptoMOS짰 Power SIP Relay

文件：116.87 Kbytes Page：6 Pages

Digital Video Encoder

Description The CXD1916R is a digital video encoder designed for Video CDs, car navigation and other digital video equipment. This device accepts ITU-R601 format Y, Cb and Cr data and ITU-R656 format Y, Cb and Cr data, and the data are encoded to composite video and separate Y/C video (S-video) s

CD-ROM Spindle Motor Driver

Overview The LB1916 is a 3-phase motor driver that is optimal for driving CD-ROM spindle motors. Functions and Features • 3-phase brushless motor driver • 120° voltage linear drive control • V-type input used for the control voltage • Control gain switching supported • Pins for system contr

Microwave Bipolar Power Amplifier

The RF Line Microware Bipolar Power Amplifier • Specified 26 Volt Characteristics: RF Output Power: 15 Watts RF Power Gain: 34 dB Typ Efficiency: 24 Min • 50 Ohm Input/Output Impedances

3 Terminal Positive Voltage Regulator 15V, 1.5A

Description: The NTE1916 is a positive 3–terminal voltage regulator in a TO3 type package suitable for numerous applications requiring up to 1.5A. Current limiting is included to limit peak output current to a safe value. Safe area protection for the output transistor is provided to limit inter

UHF amplifier module

文件：84.62 Kbytes Page：12 Pages