128/64 SEGMENT LCD DRIVER

CP2400/1/2/3 devices are fixed function LCD drivers that can also be used for expanding GPIO, timekeeping, and increasing available system RAM by up to 256 bytes. The device is controlled using direct and indirect internal registers accessible through the 4-wire SPI or 2-wire SMBus interface. All

CP2403-GM LCD 控制器

CP2403-GM 低功耗 LCD 控制器可驱动最多 64 个 LCD 段。这些器件能够与使用 I2C 接口的任何微控制器轻松通信。这种方法的一个好处是设计人员能够依据系统规模和功耗选择最适合系统的 MCU，然后添加 CP2403-GM，从而有效地处理 LCD 要求。该设备包含 20 个数字 I/O 引脚，采用 QFN32 封装 (5x5)。

CP240x LCD 控制器

CP2403-GM 低功耗 LCD 控制器可驱动多达 64 个 LCD 段。这些器件能够与使用 I2C 接口的任何微控制器轻松通信。这种方法的一个好处是设计人员能够依据系统规模和功耗选择最适合系统的 MCU，然后添加 CP2403-GM，从而有效地处理 LCD 要求。该设备包含 20 个数字 I/O 引脚，采用 QFN32 封装 (5x5)。\n ·最多可控制 128 段（48 引脚封装）或 64 段（32 引脚封装）\n·最多可将 GPIO 数量增加 36 引脚（48 引脚封装）或 20 引脚（32 引脚封装）\n·超低功耗模式，有 LCD（通常 <1.7 µA）\n·通用 RAM 扩展可供主机控制器使用的内存\n;

128/64 SEGMENT LCD DRIVER

CP2400/1/2/3 devices are fixed function LCD drivers that can also be used for expanding GPIO, timekeeping, and increasing available system RAM by up to 256 bytes. The device is controlled using direct and indirect internal registers accessible through the 4-wire SPI or 2-wire SMBus interface. All

封装/外壳：32-VFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC DRVR 64 SEGMENT 32QFN 集成电路（IC） 显示驱动器

封装/外壳：32-VFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC DRVR 64 SEGMENT 32QFN 集成电路（IC） 显示驱动器

SINGLE-SUPPLY DUAL COMPARATOR

JRC2903D -> Correct Partnumber : JRC NJM2930D The NJM2903/2403 consist of two independent precision voltage comparators with an offset voltage specification as low as 5.0mV max for two comparators, which were designed specifically to operate from a single power supply over a wide range of vol

SINGLE-SUPPLY DUAL COMPARATOR

JRC2903D -> Correct Partnumber : JRC NJM2930D The NJM2903/2403 consist of two independent precision voltage comparators with an offset voltage specification as low as 5.0mV max for two comparators, which were designed specifically to operate from a single power supply over a wide range of vol

SINGLE-SUPPLY DUAL COMPARATOR

JRC2903D -> Correct Partnumber : JRC NJM2930D The NJM2903/2403 consist of two independent precision voltage comparators with an offset voltage specification as low as 5.0mV max for two comparators, which were designed specifically to operate from a single power supply over a wide range of vol

SINGLE-SUPPLY DUAL COMPARATOR

JRC2903D -> Correct Partnumber : JRC NJM2930D The NJM2903/2403 consist of two independent precision voltage comparators with an offset voltage specification as low as 5.0mV max for two comparators, which were designed specifically to operate from a single power supply over a wide range of vol

Monolithic Triple 4.5 nS CRT Driver

文件：709.92 Kbytes Page：11 Pages