STM-1 Single Chip Add/Drop Multiplexer System device

FEATURES Dual SDH STM-1 serial LVPCEL interfaces Integrated two-channel CDR macros to interface directly with an optical module Fully compliant with ITU-T specifications for Jitter Tolerance, Transfer and Generation Regenerator and multiplexer section termination High order processing for A

21 Channel E1/T1 Mapper

FEATURES Configurable receive and transmit TU12 time-slots via microprocessor Detects loss of input clock on Telecom Interprets TU12 pointer according to G.783 (2000/10) and G.707 (2000/10) Detects LOM, TU-LOP and TU-AIS alarms Detects Remote Defect Indication (RDI), Remote Error Indication (R

STM-1/4 Single Chip Add/Drop Multiplexer System device

FEATURES SDH Overhead Processor ♦ Dual channel SDH STM-4 or STM-1 Serial LVDS interfaces ♦ Dual channel multi-rate CDR macro is integrated ♦ High jitter performance complies with ITU-T specification ♦ Regenerator and multiplex section overheads are terminated ♦ High order AU-4 pointer interp

4-port Ethernet Over SDH Mapping Device

FEATURES Supports up to four ports of full-duplex10/100 Mbit/s Ethernet or a single port of full-duplex 1000 Mbit/s Ethernet with standards-compliant flow control supported: 10/100 Mbit/s Ethernet interface supports SMII and SS-SMII 1000 Mbit/s Ethernet interface supports GMII Ethernet Manage

8-port Ethernet Over SDH Mapping Device

FEATURES Supports up to eight ports of full-duplex10/100 Mbit/s Ethernet or a single port of full-duplex 1000 Mbit/s Ethernet with standards-compliant flow control supported: 10/100 Mbit/s Ethernet interface supports SMII and SS-SMII 1000 Mbit/s Ethernet interface supports GMII Ethernet Man

OPTRANS

Universal Serial Bus stand-alone hub

General description The ISP1122 is a stand-alone Universal Serial Bus (USB) hub device which complies with USB Specification Rev. 1.1. It integrates a Serial Interface Engine (SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage regulator. It has a configurable number of

Universal Serial Bus stand-alone hub

General description The ISP1122A is a stand-alone Universal Serial Bus (USB) hub device which complies with USB Specification Rev. 1.1. It integrates a Serial Interface Engine (SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage regulator. It has a configurable number of

Universal Serial Bus stand-alone hub

General description The ISP1122A is a stand-alone Universal Serial Bus (USB) hub device which complies with USB Specification Rev. 1.1. It integrates a Serial Interface Engine (SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage regulator. It has a configurable number of

Silicon PNP epitaxial planer transistor

Silicon PNP epitaxial planer transistor For digital circuits ■ Features ● Costs can be reduced through downsizing of the equipment and reduction of the number of parts. ● M type package allowing easy automatic and manual insertion as well as stand-alone fixing to the printed circuit bo

Photo Interrupters

文件：58.89 Kbytes Page：3 Pages