SINGLE-PHASE SILICON BRIDGE

VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A, HEAT-SINK MTG 10A FEATURES • Surge overload rating—200 Amperes peak • Low forward voltage drop and reverse leakage • Small size, simple installation • Plastic package has Underwriter Laboratory Flammability Classification 94V-

SINGLE-PHASE SILICON BRIDGE(VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A, HEAT-SINK MTG 10A)

SINGLE-PHASE SILICON BRIDGE VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A, HEAT-SINK MTG 10A FEA TURES l Surge overload rating—200 Amperes peak l Low forward voltage drop and reverse leakage l Small size, simple installation l Plastic package has Underwriter Laboratory

Single Phase Bridge Rectifiers

Features: • High surge current capability • PCB mounted / screw fixing • Surge overload rating-200 amperes peak • Low forward voltage drop and reverse leakage • Small size, simple installation • Reliable low cost construction utilizing moulded plastic technique

CP1004 - 二极管 桥式整流, 单相, 400 V, 10 A, 1.1 V, 4 引脚

The CP1004 is a single-phase Bridge Rectifier with moulded plastic case with heatsink integrally mounted in the bridge encapsulation and lead solderable terminals. The CP10A series bridge rectifier features high surge current capability, 200A peak surge overload rating, low forward voltage drop and ·Small size and simple installation\n·PCB mounted/screw fixing\n·280VRMS Maximum bridge input voltage\n·200pF Typical junction capacitance per leg;

SUPER FAST RECOVERY RECTIFIER(VOLTAGE - 200 to 600 Volts CURRENT - 10.0 Amperes)

FEATURES • For thorough hole applications • Low profile package • Built-in strain relief • Easy pick and place • Superfast recovery times for high efficiency • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated junction • High temperature solde

ISOLATION SUPERFAST RECOVERY RECTIFIERS(VOLTAGE - 50 to 400 Volts CURRENT - 10.0 Amperes)

VOLTAGE 50 to 600 Volts CURRENT 10 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 • Low power loss, high efficiency. • Low forwrd voltge, hig

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 10.0 Amperes)

FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound ● Exceeds environmental standards of MIL-S-19500/228 ● Low power loss, high efficiency ● Low forward voltage, high current capability ● High surg

REFERENCE FREQUENCY 16.368 MHz, 2ND IF FREQUENCY 4.092 MHz RF/IF FREQUENCY DOWN-CONVERTER PLL FREQUENCY SYNTHESIZER IC FOR GPS RECEIVER

DESCRIPTION The µPB1005GS is a silicon monolithic integrated circuit for GPS receiver. This IC is designed as double conversion RF block integrated RF/IF down-converter + PLL frequency synthesizer on 1 chip. The µPB1005GS features shrink package, fixed prescaler and supply voltage. The 30

REFERENCE FREQUENCY 16.368 MHz, 2ND IF FREQUENCY 4.092 MHz RF/IF FREQUENCY DOWN-CONVERTER PLL FREQUENCY SYNTHESIZER IC FOR GPS RECEIVER

DESCRIPTION The µPB1005K is a silicon monolithic integrated circuit for GPS receiver. This IC is designed as double conversion RF block integrated RF/IF down-converter + PLL frequency synthesizer on 1 chip. The µPB1005K features 36-pin plastic QFN, fixed prescaler and supply voltage. The