S-8 Double Contact Bayonet Base

S-8 Double Contact Bayonet Base S-8 Double Contact Index Base S-11 Single Contact Bayonet Base

Contact Bayonet Base

S-8 Double Contact Bayonet Base S-8 Double Contact Index Base S-11 Single Contact Bayonet Base

Low-power USB audio controller with embedded MCU / I2S /SPDIF I/O / Flash / Tri-Color LED driver for Apple Lightning accessory

The CM6531N is a low power USB 2.0 audio controller builds in 8051 for Lightning  interface applications. Accompany with ultra-low power codec makes it suitable for low power headset, notebook/mobile docking and microphone applications. The internal 8051 can also be developed to different applicatio ·Support Apple iAP1/iAP2 Protocol\n·Support Apple lightning interface\n·Standby(<10mA) and operation power consumption meet Apple's spec\n·USB 2.0 full-speed compliant\n·USB Audio Class 1.0 compliant\n·USB Human Interface Device (HID) Class 1.1 compliant\n·Two (2) channel I2S for audio output interf;

USB audio codec with MCU, EQ, AGC, embedded crystal, flash and tri-color LED

The CM6533 is a USB 2.0 audio chip built-in 8051 for flexible applications. With integrated Tri-Colors PWM LED driver and two-channel ADC/DAC and S/PDIF interface that makes it suitable for headset, docking, speaker and microphone applications. The internal 8051 can also be developed to a lot of dif ●USB Compliance\n·USB spec. 2.0 full-speed compatible and USB-IF certification\n·USB audio device class spec. 1.0 compliant\n·USB HID device class spec. 1.1 compliant\n\n●Architecture\n·USB suspend/resume support\n·Embedded USB transceiver and power-on reset circuit\n·256K Byte Flash and 32K Byte pr;

CM6533 + Dolby Headphone driver

The CM6533DH is a USB 2.0 audio chip built-in 8051 for flexible applications. With integrated Tri-Colors PWM LED driver and two-channel ADC/DAC and S/PDIF interface that makes it suitable for headset, docking, speaker and microphone applications. The internal 8051 can also be developed to a lot of d ●USB Compliance\n·USB spec. 2.0 full-speed compatible and USB-IF certification\n·USB audio device class spec. 1.0 compliant\n·USB HID device class spec. 1.1 compliant\n\n●Architecture\n·USB suspend/resume support\n·Embedded USB transceiver and power-on reset circuit\n·256K Byte Flash and 32K Byte pr;

USB 2.0 Full-Speed compliant

文件：1.4027 Mbytes Page：60 Pages

USB 2.0 Full-Speed compliant

文件：1.4027 Mbytes Page：60 Pages

USB 2.0 Full-Speed compliant

文件：1.4027 Mbytes Page：60 Pages

USB 2.0 Full-Speed compliant

文件：1.4027 Mbytes Page：60 Pages

USB 2.0 Full-Speed compliant

文件：1.4027 Mbytes Page：60 Pages

USB 2.0 Full-Speed compliant

文件：1.4027 Mbytes Page：60 Pages

USB 2.0 Full-Speed compliant

文件：1.4027 Mbytes Page：60 Pages

USB 2.0 full-speed compliant

文件：1.2202 Mbytes Page：57 Pages

Silicon planer type (cathode common)

Silicon planer type (cathode common) For switching ■Features ●High reverse voltage VR ●Low forward voltage VF ●Fast reverse recovery time trr

RF POWER TRANSISTOR NPN SILICON

NPN SILICON 10 W, 512 MHz RF POWER TRANSISTOR Designed for 12.5 Volt UHF large–signal amplifier applications in industrial and commercial FM equipment operating to 512 MHz. • Specified 12.5 Volt, 512 MHz Characteristics Output Power = 10 W Gain = 8.0 dB (Typ) Efficiency = 65 (T

丝印代码：-9B；Low-voltage avalanche regulator diodes

DESCRIPTION High performance voltage regulator diodes in small SOT23 plastic SMD packages. The series consists of PLVA650A to PLVA668A. FEATURES • Very low dynamic impedance at low currents: approximately 1⁄20 of conventional series • Hard breakdown knee • Low noise: approximat

HIGH CURRENT STEP-UP CONVERTER WITH BATTERY MONITOR

DESCRIPTION The TK653xx mid power step-down converter is designed for portable battery powered systems, capable of operating from single Li-ion battery cells or two NiCad battery cells. The TK653xx provides the power switch, synchronous rectifier, and the control circuit for a buck step-down conv

NPN SILICON PLANAR(MEDIUM POWER TRANSISTORS)

FEATURES * 100 Volt VCEO * 2 Amp continuous current * Low saturation voltage * Ptot=1 Watt