G-4 1/2 Miniature Bayonet Base

G-4 1/2 Miniature Bayonet Base G-4 1/2 Miniature Screw Base G-4 1/2 Miniature 2 Pin Base

Base

文件：27.53 Kbytes Page：1 Pages

S-11 Double Contact Bayonet Base

S-11 Double Contact Bayonet Base T-3/4 Wire Terminal T-3/4 Micro-Midget Flange Base

Contact Bayonet Base Wire Terminal

S-11 Double Contact Bayonet Base T-3/4 Wire Terminal T-3/4 Micro-Midget Flange Base

Micropower 1.2V/150mA CMOS LDO Regulator with Power Good

Product Description The CM3102 is a low quiescent current (90uA) regulator that delivers up to 150mA of load current at a fixed 1.2V output. In addition, the CM3102 features a Power Good output signal (PG) that goes open drain 1 to 5 ms after the output voltage has exceeded typically 93 of its no

S-11 Double Contact Bayonet Base

S-11 Double Contact Bayonet Base T-3/4 Wire Terminal T-3/4 Micro-Midget Flange Base

Contact Bayonet Base Wire Terminal

S-11 Double Contact Bayonet Base T-3/4 Wire Terminal T-3/4 Micro-Midget Flange Base

Micropower 1.2V/150mA CMOS LDO Regulator with Power Good

Product Description The CM3102 is a low quiescent current (90uA) regulator that delivers up to 150mA of load current at a fixed 1.2V output. In addition, the CM3102 features a Power Good output signal (PG) that goes open drain 1 to 5 ms after the output voltage has exceeded typically 93 of its no

Micropower 1.2V/150mA CMOS LDO Regulator with Power Good

Product Description The CM3102 is a low quiescent current (90uA) regulator that delivers up to 150mA of load current at a fixed 1.2V output. In addition, the CM3102 features a Power Good output signal (PG) that goes open drain 1 to 5 ms after the output voltage has exceeded typically 93 of its no

400mA SMARTOR REGULATOR Vaux SWITCH

Product Description The CM3103 combines a fixed voltage regulator and a VAUX switch in a single 8-pin SOIC package. The voltage regulator is capable of delivering up to 400mA continuously at 3.3V. The output power is provided from two independent input voltage sources on a prioritized basis. Powe

400mA SMARTOR REGULATOR Vaux SWITCH

Product Description The CM3103 combines a fixed voltage regulator and a VAUX switch in a single 8-pin SOIC package. The voltage regulator is capable of delivering up to 400mA continuously at 3.3V. The output power is provided from two independent input voltage sources on a prioritized basis. Powe

400mA SMARTOR REGULATOR Vaux SWITCH

Product Description The CM3103 combines a fixed voltage regulator and a VAUX switch in a single 8-pin SOIC package. The voltage regulator is capable of delivering up to 400mA continuously at 3.3V. The output power is provided from two independent input voltage sources on a prioritized basis. Powe

400mA SMARTOR REGULATOR Vaux SWITCH

Product Description The CM3103 combines a fixed voltage regulator and a VAUX switch in a single 8-pin SOIC package. The voltage regulator is capable of delivering up to 400mA continuously at 3.3V. The output power is provided from two independent input voltage sources on a prioritized basis. Powe

400mA SMARTOR REGULATOR Vaux SWITCH

Product Description The CM3103 combines a fixed voltage regulator and a VAUX switch in a single 8-pin SOIC package. The voltage regulator is capable of delivering up to 400mA continuously at 3.3V. The output power is provided from two independent input voltage sources on a prioritized basis. Powe

T-1 1/2 Wedge Base

T-1 1/2 Wedge Base T-1 3/4 Wire Terminal

Wedge Base

T-1 1/2 Wedge Base T-1 3/4 Wire Terminal T-1 3/4 Wire Terminal (standard)

2 Amp Source/ Sink Bus Termination Regulator

Product Description The CM3106 is a sinking and sourcing regulator specifically designed for providing power to DDR memory terminating resistors and companion chip set VTT power. The output voltage accurately tracks VDDQ/2. The CM3106 can source and sink current up to 2A, ideal for DDR-I memory

2 Amp Source/ Sink Bus Termination Regulator

Product Description The CM3106 is a sinking and sourcing regulator specifically designed for providing power to DDR memory terminating resistors and companion chip set VTT power. The output voltage accurately tracks VDDQ/2. The CM3106 can source and sink current up to 2A, ideal for DDR-I memory

2 Amp Source/ Sink Bus Termination Regulator

Product Description The CM3106 is a sinking and sourcing regulator specifically designed for providing power to DDR memory terminating resistors and companion chip set VTT power. The output voltage accurately tracks VDDQ/2. The CM3106 can source and sink current up to 2A, ideal for DDR-I memory

2 Amp Source/ Sink Bus Termination Regulator

Product Description The CM3106 is a sinking and sourcing regulator specifically designed for providing power to DDR memory terminating resistors and companion chip set VTT power. The output voltage accurately tracks VDDQ/2. The CM3106 can source and sink current up to 2A, ideal for DDR-I memory

2 Amp Source/ Sink Bus Termination Regulator

Product Description The CM3106 is a sinking and sourcing regulator specifically designed for providing power to DDR memory terminating resistors and companion chip set VTT power. The output voltage accurately tracks VDDQ/2. The CM3106 can source and sink current up to 2A, ideal for DDR-I memory

2 Amp Source/ Sink Bus Termination Regulator for DDR Memory and Front Side Bus Applications

Product Description The CM3107 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high-speed chip set busses as well as DDR memory systems. It can source and sink current up to 2.0A with a load regulation of 0.5. The VTT output voltage is selectable

2 Amp Source/ Sink Bus Termination Regulator for DDR Memory and Front Side Bus Applications

Product Description The CM3107 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high-speed chip set busses as well as DDR memory systems. It can source and sink current up to 2.0A with a load regulation of 0.5. The VTT output voltage is selectable

2 Amp Source/ Sink Bus Termination Regulator for DDR Memory and Front Side Bus Applications

Product Description The CM3107 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high-speed chip set busses as well as DDR memory systems. It can source and sink current up to 2.0A with a load regulation of 0.5. The VTT output voltage is selectable

2 Amp Source/ Sink Bus Termination Regulator for DDR Memory and Front Side Bus Applications

Product Description The CM3107 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high-speed chip set busses as well as DDR memory systems. It can source and sink current up to 2.0A with a load regulation of 0.5. The VTT output voltage is selectable

2 Amp Source/ Sink Bus Termination Regulator for DDR Memory and Front Side Bus Applications

Product Description The CM3107 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high-speed chip set busses as well as DDR memory systems. It can source and sink current up to 2.0A with a load regulation of 0.5. The VTT output voltage is selectable

2 Amp Source/ Sink Bus Termination Regulator for DDR Memory and Front Side Bus Applications

Product Description The CM3107 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high-speed chip set busses as well as DDR memory systems. It can source and sink current up to 2.0A with a load regulation of 0.5. The VTT output voltage is selectable

2 Amp Source/ Sink Bus Termination Regulator for DDR Memory and Front Side Bus Applications

Product Description The CM3107 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high-speed chip set busses as well as DDR memory systems. It can source and sink current up to 2.0A with a load regulation of 0.5. The VTT output voltage is selectable

2A Sink/Source Regulator for Front Side Bus and DDR Memory Bus Termination

Product Description The CM3109 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high speed chip set buses as well as DDR memory systems. It can source and sink current up to 2A with high accuracy of 0.5 . The VTT output voltage is selectable by VDD

2A Sink/Source Regulator for Front Side Bus and DDR Memory Bus Termination

Product Description The CM3109 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high speed chip set buses as well as DDR memory systems. It can source and sink current up to 2A with high accuracy of 0.5 . The VTT output voltage is selectable by VDD

2A Sink/Source Regulator for Front Side Bus and DDR Memory Bus Termination

Product Description The CM3109 is a sinking and sourcing regulator specifically designed for series-parallel bus termination for high speed chip set buses as well as DDR memory systems. It can source and sink current up to 2A with high accuracy of 0.5 . The VTT output voltage is selectable by VDD

S-8 Double Contact Bayonet Base

S-8 Double Contact Bayonet Base S-8 Double Contact Index Base S-11 Single Contact Bayonet Base

Contact Bayonet Base

S-8 Double Contact Bayonet Base S-8 Double Contact Index Base S-11 Single Contact Bayonet Base

T-1 1/2 Wedge Base

T-1 1/2 Wedge Base T-1 3/4 Wire Terminal

Wedge Base

T-1 1/2 Wedge Base T-1 3/4 Wire Terminal T-1 3/4 Wire Terminal (standard)

150mA/1.2V CMOS LDO Regulator

Product Description The CM3112-12 is a low quiescent current (90uA) regulator that delivers up to 150mA of load current at a fixed 1.2V output. All the necessary circuitry has been included to deliver a 50Ω power good signal (open drain) which remains for 5ms after the output has exceeded 90 (typ

150mA/1.2V CMOS LDO Regulator

Product Description The CM3112-12 is a low quiescent current (90uA) regulator that delivers up to 150mA of load current at a fixed 1.2V output. All the necessary circuitry has been included to deliver a 50Ω power good signal (open drain) which remains for 5ms after the output has exceeded 90 (typ

150mA/1.2V CMOS LDO Regulator

Product Description The CM3112-12 is a low quiescent current (90uA) regulator that delivers up to 150mA of load current at a fixed 1.2V output. All the necessary circuitry has been included to deliver a 50Ω power good signal (open drain) which remains for 5ms after the output has exceeded 90 (typ

150mA/1.2V CMOS LDO Regulator

Product Description The CM3112-12 is a low quiescent current (90uA) regulator that delivers up to 150mA of load current at a fixed 1.2V output. All the necessary circuitry has been included to deliver a 50Ω power good signal (open drain) which remains for 5ms after the output has exceeded 90 (typ

S-11 Double Contact Bayonet Base

S-11 Double Contact Bayonet Base T-3/4 Wire Terminal T-3/4 Micro-Midget Flange Base

Contact Bayonet Base Wire Terminal

S-11 Double Contact Bayonet Base T-3/4 Wire Terminal T-3/4 Micro-Midget Flange Base

IO-link master transceiver

T-3 1/4 Miniature Bayonet Base

T-3 1/4 Miniature Bayonet Base T-3 1/4 Miniature Screw Base

Bayonet Base, Screw Base

T-3 1/4 Miniature Bayonet Base T-3 1/4 Miniature Screw Base

Triple Linear Voltage Regulator for DDR-I/-II Memory

Product Description The CM3131 family of all-linear regulators provides an integrated power solution for DDR-I/-II memory systems in both run-time and standby modes of operation. The CM3131 is ideal for designs incorporating both a main 3.3V and a standby (3.3V or 5V) supply. The CM3131 features

Triple Linear Voltage Regulator for DDR-I/-II Memory

Product Description The CM3131 family of all-linear regulators provides an integrated power solution for DDR-I/-II memory systems in both run-time and standby modes of operation. The CM3131 is ideal for designs incorporating both a main 3.3V and a standby (3.3V or 5V) supply. The CM3131 features

Triple Linear Voltage Regulator for DDR-I/-II Memory

Product Description The CM3131 family of all-linear regulators provides an integrated power solution for DDR-I/-II memory systems in both run-time and standby modes of operation. The CM3131 is ideal for designs incorporating both a main 3.3V and a standby (3.3V or 5V) supply. The CM3131 features

Triple Linear Voltage Regulator for DDR-I/-II Memory

Product Description The CM3131 family of all-linear regulators provides an integrated power solution for DDR-I/-II memory systems in both run-time and standby modes of operation. The CM3131 is ideal for designs incorporating both a main 3.3V and a standby (3.3V or 5V) supply. The CM3131 features

Triple Linear Voltage Regulator for DDR-I/-II Memory

Product Description The CM3131 family of all-linear regulators provides an integrated power solution for DDR-I/-II memory systems in both run-time and standby modes of operation. The CM3131 is ideal for designs incorporating both a main 3.3V and a standby (3.3V or 5V) supply. The CM3131 features

Triple Linear Voltage Regulator for DDR-I/-II Memory

Product Description The CM3131 family of all-linear regulators provides an integrated power solution for DDR-I/-II memory systems in both run-time and standby modes of operation. The CM3131 is ideal for designs incorporating both a main 3.3V and a standby (3.3V or 5V) supply. The CM3131 features

Triple Linear Voltage Regulator for DDR-I/-II Memory

Product Description The CM3131 family of all-linear regulators provides an integrated power solution for DDR-I/-II memory systems in both run-time and standby modes of operation. The CM3131 is ideal for designs incorporating both a main 3.3V and a standby (3.3V or 5V) supply. The CM3131 features

Triple Linear Voltage Regulator for DDR-I Memory and CPU

Product Description The CM3132 provides an integrated power solution for a CPU core and DDR-I memory for consumer and other embedded applications. It features three independent linear regulators for VCORE, VDDQ and VTT supply regulation. The default voltage for VCORE is 1.5V. The SENSE_CORE pin c

Triple Linear Voltage Regulator for DDR-I Memory and CPU

Product Description The CM3132 provides an integrated power solution for a CPU core and DDR-I memory for consumer and other embedded applications. It features three independent linear regulators for VCORE, VDDQ and VTT supply regulation. The default voltage for VCORE is 1.5V. The SENSE_CORE pin c

Triple Linear Voltage Regulator for DDR-I Memory and CPU

Product Description The CM3132 provides an integrated power solution for a CPU core and DDR-I memory for consumer and other embedded applications. It features three independent linear regulators for VCORE, VDDQ and VTT supply regulation. The default voltage for VCORE is 1.5V. The SENSE_CORE pin c

T-1 3/4 Bi-Pin Base (.125)

T-1 3/4 Bi-Pin Base (.125)

S-8 Single Contact Bayonet Base

S-8 Single Contact Bayonet Base Chicago Miniature Lamp reserves the right to make specification revisions that enhance the design and/or performance of the product

Single Contact Bayonet Base

S-8 Single Contact Bayonet Base

T-1 3/4 Midget Flange Base

T-1 3/4 Midget Flange Base

T-1 1/2 Wedge Base

T-1 1/2 Wedge Base T-1 3/4 Wire Terminal

Wedge Base

T-1 1/2 Wedge Base T-1 3/4 Wire Terminal T-1 3/4 Wire Terminal (standard)