Band off mode 3W Audio Power Amplifier

Main features ■ When the distortion is 10, the input signal is 1KHZ, and the output power under different load conditions is: ·3 ohm, 3W (typ.) ·4 ohms, 2.5W (typ.) ·8 ohm load, 1.5W (typ). ■ Standby current: 0.6μA ■ Working voltage: 2.0-5.5V. ■ When the input signal frequency is 1KHZ, the

Power Output at 5.0V, 10% THDN, 3Ω 3W (typ)

General Description The 8002 is an audio power amplifier primarily designed for demanding applications in low-power portable systems. It is capable of delivering 3 watts of continuous average power to an 3Ω BTL load with less than 10% distortion (THD) from a 5VDC power supply. the 8002 doe

2.0 Watt Audio Power Amplifier

Features
Improved PSRR at 217 Hz & 1 KHz 60 dB
Power output at 5.0V, 10% THD+N, 4Ω 2.0 W (typ.)
Power output at 5.0V, 1% THD+N, 8Ω 1.5 W (typ.)
2.2V – 5.5V operation
Improved circuitry eliminates pop-click noise during turn-on and turn-off transitions
No output coupling c

T1/CEPT Extended Temperature Range SMD Dual Line Interface Module

Units matched to leading transceiver ICs. Meet requirements for T1, E1, CEPT and PRI ISDN over extended temperature range –40 to +85˚C.

DIP Reed Relays

DIP REED RELAYS The 8000 Series is ideally suited to the needs of Automated Test Equipment, Instrumentation, Data Acquisition, and Process Control requirements. The specification tables allow you to select the appropriate relay for your particular application. If your requirements differ from the

Portable computers

文件：629.51 Kbytes Page：17 Pages