High Speed CMOS Logic Hex Buffer/Line Driver, Three-State Non-Inverting and Inverting

1 Features • Buffered inputs • High current bus driver outputs • Typical propagation delay tPLH, tPHL = 8 ns at VCC = 5 V, CL = 15 pF, TA = 25℃ • Fanout (over temperature range) – Standard outputs: 10 LSTTL Loads – Bus driver outputs: 15 LSTTL Loads • Wide operating temperature range: -55℃

Hex buffer/line driver; 3-state

1. General description The 74HC365; 74HCT365 is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (OEn). A HIGH on OEn causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to i

Hex buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT365 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Non-inverting outputs • Output capability: bus driver • ICC category: MSI

Hex 3-State Noninverting Buffer with Common Enables

Hex 3-State Noninverting Buffer with Common Enables High-Performance Silicon-Gate CMOS The SL74HC365 is identical in pinout to the LS/ALS365. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This device is a

Hex buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT365 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Non-inverting outputs • Output capability: bus driver • ICC category: MSI

HEX BUFFER / LINE DRIVER 3-STATE

文件：166.4 Kbytes Page：4 Pages