CMOS 四路时钟控制“D”锁存器

CD4042B types contain four latch circuits, each strobed by a common clock. Complementary buffered outputs are available from each circuit. The impedance of the n- and p-channel output devices is balanced and all outputs are electrically identical.\n\n Information present at the data input is transfe • Clock polarity control\n• Common Clock\n• Standardized, symmetrical output characteristics\n• Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C\n• Noise margin (full package-temperature range) =         1 V at VDD = 5 V         2 V at VDD = 10 V   ;

CMOS Quad Clocked D Latch

文件：1.87567 Mbytes Page：30 Pages

Quadruple D-latch

DESCRIPTION The HEF4042B is a 4-bit latch with four data inputs (D0 to D3), four buffered latch outputs (O0 to O3), four buffered complementary latch outputs (O0 to O3) and two common enable inputs (E0 and E1). Information on D0 to D3 is transferred to O0 to O3 while both E0 and E1 are in the sam

QUAD CLOCKED D LATCH

Description The HCC4000B series is composed of close to 80 monolithic types built with Metal Oxide Complementary technology. It provides Designers with high voltage noise tolerant complete Logic series. It radiation hardness and immunity to Heavy Ions make this series to be usable in the

Quadruple D-latch

DESCRIPTION The HEF4042B is a 4-bit latch with four data inputs (D0 to D3), four buffered latch outputs (O0 to O3), four buffered complementary latch outputs (O0 to O3) and two common enable inputs (E0 and E1). Information on D0 to D3 is transferred to O0 to O3 while both E0 and E1 are in the sam

Quadruple D-latch

DESCRIPTION The HEF4042B is a 4-bit latch with four data inputs (D0 to D3), four buffered latch outputs (O0 to O3), four buffered complementary latch outputs (O0 to O3) and two common enable inputs (E0 and E1). Information on D0 to D3 is transferred to O0 to O3 while both E0 and E1 are in the sam

Quadruple D-latch

DESCRIPTION The HEF4042B is a 4-bit latch with four data inputs (D0 to D3), four buffered latch outputs (O0 to O3), four buffered complementary latch outputs (O0 to O3) and two common enable inputs (E0 and E1). Information on D0 to D3 is transferred to O0 to O3 while both E0 and E1 are in the sam