CMOS 四路双向开关

CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.\n The CD4016 • 20-V digital or ± 10-V peak-to-peak switching\n• Switch on-state resistance matched to within 10 typ. over 15-V signal-input range\n• High degree of linearity:    is = 1 kHz, Vis = 5 Vp-p, VDD–VSS \n• Extremely high control input impedance (control circuit isolated form signal circuit:    1012typ;

CMOS Quad Bilateral Switch

文件：1.21371 Mbytes Page：18 Pages

Quad Analog Switch/Quad Multiplexer

The MC14016B quad bilateral switch is constructed with MOS P–channel and N–channel enhancement mode devices in a single monolithic structure. Each MC14016B consists of four independent switches capable of controlling either digital or analog signals. The quad bilateral switch is used in signal gat

Quad bilateral switches

GENERAL DESCRIPTION The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). FEATURES •

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec

Quadruple bilateral switches

DESCRIPTION The HEF4016B has four independent analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E is connec