Quad 1-of-2 multiplexer/demultiplexer

DESCRIPTION The CBT3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output Enable (OE) and select-control (S) inp

Quad 1-of-2 multiplexer/demultiplexer

丝印代码：CBT3257C；4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V Bidirectional Data Flow, With Near-Zero Propagation Delay Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typical) Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5.5 pF Typical)

丝印代码：CBT3257C；4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V Bidirectional Data Flow, With Near-Zero Propagation Delay Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typical) Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5.5 pF Typical)

丝印代码：CBT3257C；4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V Bidirectional Data Flow, With Near-Zero Propagation Delay Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typical) Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5.5 pF Typical)

丝印代码：CBT3257C；4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V Bidirectional Data Flow, With Near-Zero Propagation Delay Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typical) Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5.5 pF Typical)

丝印代码：CBT3257C；4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V Bidirectional Data Flow, With Near-Zero Propagation Delay Low ON-State Resistance (ron) Characteristics (ron = 3 Ω Typical) Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 5.5 pF Typical)

Quad 1-of-2 multiplexer/demultiplexer

General description The CBT3257A is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON-state resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output enable (OE) and sele

Quad 1-of-2 multiplexer/demultiplexer

Quad 1-of-2 multiplexer/demultiplexer

1. General description The CBT3257A is a quad single-pole, dual-throw bus switch. The device features an output enable input (OE) and a select input (S). When OE is LOW the switch is enabled and the select input can be used to connect the nA terminals to either of the associated nB terminals.

Quad 1-of-2 multiplexer/demultiplexer

1. General description The CBT3257A is a quad single-pole, dual-throw bus switch. The device features an output enable input (OE) and a select input (S). When OE is LOW the switch is enabled and the select input can be used to connect the nA terminals to either of the associated nB terminals.

Quad 1-of-2 multiplexer/demultiplexer

Quad 1-of-2 multiplexer/demultiplexer

The CBT3257A is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.\n Output enable (OE) and select-control (S) inputs select • 5 Ω switch connection between two ports\n• TTL-compatible input levels\n• Minimal propagation delay through the switch\n• Latch-up protection exceeds 100 mA per JEDEC standard JESD78 class II level A\n• ESD protection:• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V\n• CDM JESD2;

Quad 1-of-2 multiplexer/demultiplexer

The CBT3257A is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.\n Output enable (OE) and select-control (S) inputs select • 5 Ω switch connection between two ports\n• TTL-compatible input levels\n• Minimal propagation delay through the switch\n• Latch-up protection exceeds 100 mA per JEDEC standard JESD78 class II level A\n• ESD protection:• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V\n• CDM JESD2;

Quad 1-of-2 multiplexer/demultiplexer

Quad 1-of-2 multiplexer/demultiplexer

1. General description The CBT3257A is a quad single-pole, dual-throw bus switch. The device features an output enable input (OE) and a select input (S). When OE is LOW the switch is enabled and the select input can be used to connect the nA terminals to either of the associated nB terminals.

Low On Resistance, Quad SPDT Analog Switch

Features Supply voltage: 1.5 ~ 5.5V ultra-low On Resistance: 4.0 Q » -3dB Bandwidth :600MHz o Rail-to-Rail Signal Range » Break-Before-Make Switching « Low quiescent current over an Expanded Control Input Range: Standard Products are Pb-free and halogen-free » Packaging: S

Quad 1-of-2 multiplexer/demultiplexer

General description The CBT3257A is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON-state resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output enable (OE) and sele

Quad 1-of-2 multiplexer/demultiplexer

General description The CBT3257A is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON-state resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output enable (OE) and sele

Quad 1-of-2 multiplexer/demultiplexer

Quad 1-of-2 multiplexer/demultiplexer

Quad 1-of-2 multiplexer/demultiplexer

1. General description The CBT3257A is a quad single-pole, dual-throw bus switch. The device features an output enable input (OE) and a select input (S). When OE is LOW the switch is enabled and the select input can be used to connect the nA terminals to either of the associated nB terminals.

Quad 1-of-2 multiplexer/demultiplexer

General description The CBT3257A is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON-state resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output enable (OE) and sele

Quad 1-of-2 multiplexer/demultiplexer

1. General description The CBT3257A is a quad single-pole, dual-throw bus switch. The device features an output enable input (OE) and a select input (S). When OE is LOW the switch is enabled and the select input can be used to connect the nA terminals to either of the associated nB terminals.

Quad 1-of-2 multiplexer/demultiplexer

General description The CBT3257A is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON-state resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output enable (OE) and sele

Quad 1-of-2 multiplexer/demultiplexer

Quad 1-of-2 multiplexer/demultiplexer

1. General description The CBT3257A-Q100 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output enable (OE) and sele

Quad 1-of-2 multiplexer/demultiplexer

1. General description The CBT3257A-Q100 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output enable (OE) and sele

Quad 1-of-2 multiplexer/demultiplexer

DESCRIPTION The CBT3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output Enable (OE) and select-control (S) inp

Quad 1-of-2 multiplexer/demultiplexer

DESCRIPTION The CBT3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output Enable (OE) and select-control (S) inp

Quad 1-of-2 multiplexer/demultiplexer

DESCRIPTION The CBT3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output Enable (OE) and select-control (S) inp

Quad 1-of-2 multiplexer/demultiplexer

DESCRIPTION The CBT3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output Enable (OE) and select-control (S) inp

封装/外壳：16-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC MUX/DEMUX 4 X 2:1 16SO 集成电路（IC） 信号开关，多路复用器，解码器

封装/外壳：16-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC MUX/DEMUX 4 X 2:1 16SO 集成电路（IC） 信号开关，多路复用器，解码器

8/16-bit Data Bus Static RAM Card

DESCRIPTION Mitsubishi’s Static RAM cards provide large memory capacities on a device approximately the size of a credit card(85.6mm´54mm´3.3mm). The cards use a 8 / 1 6 bit data bus.The devices use a replaceable lithium battery to maintain data. Available in 64K byte-4M byte capacities, Mitsubis

8/16-bit Data Bus Static RAM Card

DESCRIPTION Mitsubishi’s Static RAM cards provide large memory capacities on a device approximately the size of a credit card(85.6mm´54mm´3.3mm). The cards use a 8 / 1 6 bit data bus.The devices use a replaceable lithium battery to maintain data. Available in 64K byte-4M byte capacities, Mitsubis

8/16-bit Data Bus Static RAM Card

DESCRIPTION Mitsubishi’s Static RAM cards provide large memory capacities on a device approximately the size of a credit card (85.6mm´54mm´3.3mm). The cards use a 8/16 bit data-bus. FEATURES ■ Uses TSOP (Thin Small Outline Package) to achieve very high memory density coupled with high reliabili

8/16-bit Data Bus Static RAM Card

DESCRIPTION Mitsubishi’s Static RAM cards provide large memory capacities on a device approximately the size of a credit card (85.6mm´54mm´3.3mm). The cards use a 8/16 bit data-bus. The devices use a replaceable lithium battery to maintain data. Available in 64K byte-4M byte capacities, Mitsubish

Quad 2:1 Mux/Demux VSwitch

General Description The VS3257 is a high-speed TTL–compatible Quad 2:1 multiplexer/demultiplexer. The VS3257 contains four mux/demux channels, with a common path control (S) and active low enable (/E). The low ON resistance of the VS3257 allows inputs to be connected to outputs, without adding pr