1700 WATTS (AC) DC/D CSINGLE OUTPUT

Features • Single Output • 6U x 42TE x 226mm • Weight: 10kg

Signal processing circuit for 1-D PSD

Signal processing circuit for 1-D PSD Circuit board for easier 1-D PSD operation Features ● No complicated adjustments required Position can be measured just by installing a 1-D PSD on the board. ● Accurate position sensing Position data of light spot is independent of light intens

一维PSD电路板，使PSD更加易用

C3683-02是一款一维PSD的直流信号处理电路，适合对直流光的位移测量。 \n- 无需复杂调整\n- 输出电压代表位置数据\n- 准确的位置探测\n- 三个灵敏度范围\n- 尺寸小巧;

1700 WATTS (AC) DC/D CSINGLE OUTPUT

Features • Single Output • 6U x 42TE x 226mm • Weight: 10kg

1700 WATTS (AC) DC/D CSINGLE OUTPUT

Features • Single Output • 6U x 42TE x 226mm • Weight: 10kg

Signal processing circuit for 1-D PSD

Signal processing circuit for 1-D PSD

文件：547.96 Kbytes Page：5 Pages

2.4GHz RF/IF Converter and Synthesizer

The HFA3683A is a monolithic SiGe half-duplex RF/IF transceiver designed to operate in the 2.4GHz ISM band. The receive chain features a low noise, gain selectable amplifier (LNA) followed by a down-converter mixer. An up-converter mixer and a high performance preamplifier compose the transmit cha

2.4GHz RF/IF Converter and Synthesizer

The HFA3683A is a monolithic SiGe half-duplex RF/IF transceiver designed to operate in the 2.4GHz ISM band. The receive chain features a low noise, gain selectable amplifier (LNA) followed by a down-converter mixer. An up-converter mixer and a high performance preamplifier compose the transmit cha

Inverting Charge Pump Voltage Doublers with Active Low Shutdown

General Description The TC3682/TC3683/TC3684 are CMOS charge pump converters that provide an inverted doubled output from a single positive supply. An on-board oscillator provides the clock and only three external capacitors are required for full circuit implementation. Switching frequencies ar

Inverting Charge Pump Voltage Doublers with Active Low Shutdown

General Description The TC3682/TC3683/TC3684 are CMOS charge pump converters that provide an inverted doubled output from a single positive supply. An on-board oscillator provides the clock and only three external capacitors are required for full circuit implementation. Switching frequencies ar

Precision Potentiometer

文件：172.21 Kbytes Page：2 Pages