The device Type 8026 is specially designed for measuring the flow rate in solid-free

liquids in a variety of applications (water treatment, waste water monitoring, chemical

processing, etc.). The Bürkert-designed fitting system ensures simple installation

of the device into all pipes from DN 20…DN 400.

The device is provided either with 2 configurable outputs (1 transistor output (NPN)

and (1 current output 4…20 mA, 2-wire), or with 3 configurable outputs (2 transistor

outputs (NPN/PNP) and 1 current output 4…20 mA, 2-wire) or with 4 configurable

outputs (2 transistor outputs (NPN/PNP) and (2 current outputs 4…20 mA, 3-wire).

The device converts the measured signal, displays different values in different units

(if the display/configuration module is mounted) and computes the output signals

which are provided via one or two M12 fixed connectors. Thanks to 1 or 2 transistor

outputs, the flowmeter can be used to switch a solenoid valve, activate an alarm

and, thanks to 1 or 2 current outputs, establish one or two control loops.

Type description