12-bit, serial IN, parallel OUT driver

The BU2090, BU2090F, BU2090FS, BU2092, BU2092F, and BU2092FV are 12-bit serial input, parallel output drivers. For the BU2090 / F / FS, data input is shifted to the 12-bit internal shift register on the rising edge of a clock pulse. On the falling edge of the pulse, if the DATA pin is HIGH, the

12bit Serial IN / Parallel Out Driver

●Description Serial-in-parallel-out driver is a open drain output driver. It incorporates a built-in shift register and a latch circuit to turn on a maximum of 12 LED by a 2-line interface, linked to a microcontroller. A open drain output provides maximum of 25mA current. ●Features 1) LED ca

Serial/Parallel 2-input Drivers

BU2090FS是能够通过与微控制器的串行接口来控制12个LED亮灯的、内置移位寄存器和锁存器的输出驱动器。 •可以直接驱动LED(输出电流25mA)\n•12bit并行输出\n•可以低电压驱动(2.7 to 5.5V);

Serial / Parallel 2-input Drivers

文件：299.63 Kbytes Page：13 Pages

Serial / Parallel 2-input Drivers

文件：299.63 Kbytes Page：13 Pages

2-input Serial- in / Parallel- out Drivers

文件：1.30055 Mbytes Page：16 Pages

封装/外壳：16-LSOP（0.173"，4.40mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC DRIVER 1/0 16SSOP 集成电路（IC） 驱动器，接收器，收发器

12-bit, serial IN, parallel OUT driver

The BU2090, BU2090F, BU2090FS, BU2092, BU2092F, and BU2092FV are 12-bit serial input, parallel output drivers. For the BU2090 / F / FS, data input is shifted to the 12-bit internal shift register on the rising edge of a clock pulse. On the falling edge of the pulse, if the DATA pin is HIGH, the

12-24GHz Frequency Multiplier

Description The CHX2090 is a cascadable by 2 frequency multiplier monolithic circuit. It is designed for a wide range of applications, from military to commercial communication systems. The backside of the chip is both RF and DC grounds. This helps simplify the assembly process. The circuit is m

12-24GHz Frequency Multiplier

Description The monolithic microwave IC (MMIC) in the package is a cascadable by 2 frequency multiplier. It is designed for a wide range of applications, from military to commercial communication systems. The circuit is manufactured with a PM-HEMT process, 0.25µm gate length, via holes through th

SWITCHMODE??Power Rectifiers

SWITCHMODE™ Power Rectifiers . . . using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: • 20 Amps Total (10 Amps Per Diode Leg) • Guard–Ring for Stress Protection • Low Forward Voltage • 150°C Operating Junction Temper

Integrated Circuit 7-Channel Transistor Array

Description: The NTE2090 is an integrated circuit in a 16–Lead DIP type package comprised of six NPN low saturation drivers. All units feature integral clamp diodes for switching inductive loads and protective diodes for protection against a negative input voltage. Features: • Low Saturation