BTS 3256D 是一款采用 PG-TO-252-5-11 封装的单通道低侧电源开关，提供嵌入式保护功能

The BTS 3256D is a single channel low-side power switch in PG-TO-252-5-11 package providing embedded protective functions. This HITFET™ is designed for automotive and industrial applications with outstanding protection and control features. The power transistor is a N-channel vertical power MOSFET. • Slew rate control by dedicated pin enabling EMC optimized switching or PWM operation\n• Max. switching Frequency 12kHz\n• Clear detection of digital fault signal also during fast PWM operation due to restart delay time\n• Thermal and overload protection with time controlled auto restart behavior\n;

10 m廓 smart power single channel low side switch with restart and variable slew rate

文件：1.5529 Mbytes Page：30 Pages

Smart Low Side Power Switch

文件：1.55258 Mbytes Page：20 Pages

25MHz, BiMOS Analog Video Switch and Amplifier

Description The CA3256 BiMOS analog video switch has five channels of CMOS multiplex switching for general-purpose videosignal control. One of four CMOS channels may be selected in parallel with channel 5. Features • 5 Multiplex Video Channels - 1 Independent Channel - 4 Channels wit

25MHz, BiMOS Analog Video Switch and Amplifier

Description The CA3256 BiMOS analog video switch has five channels of CMOS multiplex switching for general-purpose videosignal control. One of four CMOS channels may be selected in parallel with channel 5. Features • 5 Multiplex Video Channels - 1 Independent Channel - 4 Channels wit

25MHz, BiMOS Analog Video Switch and Amplifier

Description The CA3256 BiMOS analog video switch has five channels of CMOS multiplex switching for general-purpose videosignal control. One of four CMOS channels may be selected in parallel with channel 5. Features • 5 Multiplex Video Channels - 1 Independent Channel - 4 Channels wit

8-bit 120MSPS Flash A/D Converter

Description The CXA3256R is an 8-bit high-speed flash A/D converter capable of digitizing analog signals at the maximum rate of 120MSPS. ECL, PECL or TTL can be selected as the digital input level in accordance with the application. The TTL digital output level allows 1:2 demultiplexed output. T

In-System Programmable High Density PLD

文件：163.44 Kbytes Page：13 Pages