无需耦合电容器的线路放大器

BD8876FV是无需输出耦合电容器的线路放大器。内置负电源发生电路。通过采用正电压与负电压的两种电压来驱动线路放大器，以ground level为基准进行输出。因此，具有广阔的输出动态范围，可利用5V的单电源输出2Vrms的信号。由此，可减少高电压输出的稳压器。此外，因为是以ground为基准进行输出，无需输出耦合电容器即可连接其他元器件。 • Possible to output 2Vrms with single-supply 5V\n• Output Coupling Capacitor-less\n• Variable Gain (+6dB / +9dB Typ.) [BD8876FV]\n• Fixed Gain (+6.7dB Typ.) [BD8878FV]\n• Integrated Negative Power Supply\n• Ground-Referenced Outputs\n• Integrated Short-Circuit and Thermal Protection;

无需耦合电容器的线路放大器

BD8878FV是无需输出耦合电容器的线路放大器。内置负电源发生电路。通过采用正电压与负电压的两种电压来驱动线路放大器，以ground level为基准进行输出。因此，具有广阔的输出动态范围，可利用5V的单电源输出2Vrms的信号。由此，可减少高电压输出的稳压器。此外，因为是以ground为基准进行输出，无需输出耦合电容器即可连接其他元器件。 • Possible to output 2Vrms with single-supply 5V\n• Output Coupling Capacitor-less\n• Variable Gain (+6dB / +9dB Typ.) [BD8876FV]\n• Fixed Gain (+6.7dB Typ.) [BD8878FV]\n• Integrated Negative Power Supply\n• Ground-Referenced Outputs\n• Integrated Short-Circuit and Thermal Protection;

Output Coupling Capacitor-less Line Amplifier

文件：1.11174 Mbytes Page：24 Pages

Output Coupling Capacitor-less Line Amplifier

文件：1.11174 Mbytes Page：24 Pages

Output Coupling Capacitor-less Line Amplifier

文件：1.11174 Mbytes Page：24 Pages

Output Coupling Capacitor-less Line Amplifier

文件：1.11174 Mbytes Page：24 Pages

CATV amplifier module

DESCRIPTION Hybrid dynamic range amplifier module in a SOT115J package operating with a voltage supply of 24 V (DC). FEATURES • Excellent linearity • Extremely low noise • Excellent return loss properties • Silicon nitride passivation • Rugged construction • Gold metallization ensures exce

CATV amplifier module

DESCRIPTION Hybrid amplifier module in a SOT115J package operating with a voltage supply of 24 V (DC). This high gain module consists of two cascaded stages, both in cascode configuration. FEATURES • Excellent linearity • Extremely low noise • High gain • Excellent return loss properties. A

Optical receiver module

DESCRIPTION Hybrid high dynamic range optical receiver module in a SOT115R package operating at a voltage supply of 24 V (DC). The module contains a monomode optical input suitable for wavelengths from 1290 to 1600 nm, a terminal to monitor the pin diode current and an electrical output with an i

Integrated Circuit Low Power, JFET OP Amplifier

Description: The NTE887M is a JFET–input operational amplifier in an 8–Lead DIP type package designed as a low–power version of the NTE857M amplifier. This device features high input impedance, wide bandwidth, high slew rate, and low input offset and bias current. Features: ● Very Low Power Con

Integrated Circuit Low Power, JFET OP Amplifier

Description: The NTE887M is a JFET–input operational amplifier in an 8–Lead DIP type package designed as a low–power version of the NTE857M amplifier. This device features high input impedance, wide bandwidth, high slew rate, and low input offset and bias current. Features: ● Very Low Power Con