PNP power transistor

DESCRIPTION PNP power transistor in a TO-202; SOT128B plastic package. NPN complement: BD829. FEATURES • High current (max. 1 A) • Low voltage (max. 80 V). APPLICATIONS • General purpose • Driver stages in hi-fi amplifiers and television circuits.

isc Silicon PNP Power Transistor

DESCRIPTION • Collector-Emitter Breakdown Voltage- : V(BR)CEO= -100V(Min) • High DC Current Gain • Low Saturation Voltage • Complement to Type BD829 • Minimum Lot-to-Lot variations for robust device performance and reliable operation APPLICATIONS • Designed for driver-stages in hi-fi amplif

丝印代码：BD83064MWF；64-Channel Constant Current Drivers Embedded Backlight LED Driver for Automotive

Features ◼ AEC-Q100 Qualified(Note 1) ◼ ISO 26262 Process Compliant to Support ASIL-B ◼ Integrated 64-channel LED Constant Current Drivers ◼ SPI Interface (Cascade Connection Feasible) ◼ 16-bit PWM Dimming (Min On Pulse 0.5 μs) ◼ 6-bit Global Dimming (50 % to 100 %) ◼ LED Constant C

High-effciency Step-up/down Switching Regulator with Built-in Power MOSFET

General Description ROHM’s highly-efficient step-up/down switching regulator BD8301MUV produces step-up/down output including 3.3 V from 1 cell of lithium battery with just one coil. This IC adopts an original step-up/down drive system and creates a higher efficient power supply than conventiona

High-effciency Step-up/down Switching Regulator with Built-in Power MOSFET

General Description ROHM’s highly-efficient step-up/down switching regulator BD8301MUV produces step-up/down output including 3.3 V from 1 cell of lithium battery with just one coil. This IC adopts an original step-up/down drive system and creates a higher efficient power supply than conventiona

High-efficiency Step-up/down Switching Regulator with Built-in Power MOSFET

General Description\nROHM’s highly-efficient step-up/down switching regulator BD8301MUV produces step-up/down output including 3.3 V from 1 cell of lithium battery with just one coil.\nThis IC adopts an original step-up/down drive system and creates a higher efficient power supply than conventional 1)  Highly-efficient step-up/down DC/DC converter to be constructed just with one inductor.\n2)  Input voltage  2.5 V - 5.5 V\n3)  Output current  1 A at 3.3 V\n                          800 mA at 5.0 V\n4)  Incorporates soft-start function.\n5)  Incorporates timer latch system short protecting func;

2.7-14V 1ch Buck-Boost converter(controller)

BD8303MUV可以用1个电感器构成从1节锂电池、4节干电池、2节锂电池生成3.3V/5V等升降压输出。采用独创的升降压驱动方式，与以前的Sepic方式、H桥方式的开关稳压器相比，可实现高效电源。 •可用1个电感器构成高效的升降压DC/DC转换器\n•支持宽电源电压范围（输入电压2.7V～14.0V）\n•通过外置Nch FET可支持大电流应用\n•内置软起动功能\n•内置Timer latch式短路保护功能\n•高散热性面贴装封装VQFN016V3030;

Step-up/down, High-efficiency Switching Regulators (Controller type)

General Description BD8303MUV is ROHM’s high efficiency step-up/step-down switching regulator IC. It produces output of 3.3V / 5V from 1 cell of lithium battery, 4 batteries, or 2 cells of Li batteries with just one inductor. This IC uses an original step-up/step-down drive system and provides a

Step-up/down, High-efficiency Switching Regulators (Controller type)

General Description BD8303MUV is ROHM’s high efficiency step-up/step-down switching regulator IC. It produces output of 3.3V / 5V from 1 cell of lithium battery, 4 batteries, or 2 cells of Li batteries with just one inductor. This IC uses an original step-up/step-down drive system and provides a

High-effciency Step-up/down Switching Regulators with Built-in Power MOSFET

Description ROHM’s highly-efficient step-up/down switching regulator BD8305MUV produces step-up/down output including 3.3 V from 1 cell of lithium battery with just one coil.This IC adopts an original step-up/down drive system and creates a higher efficient power supply than conventional Sepic-sy

High-effciency Step-up/down Switching Regulators with Built-in Power MOSFET

Description ROHM’s highly-efficient step-up/down switching regulator BD8305MUV produces step-up/down output including 3.3 V from 1 cell of lithium battery with just one coil.This IC adopts an original step-up/down drive system and creates a higher efficient power supply than conventional Sepic-sy

64-Channel Constant Current Drivers Embedded Backlight LED Driver for Automotive

Features ◼ AEC-Q100 Qualified(Note 1) ◼ ISO 26262 Process Compliant to Support ASIL-B ◼ Integrated 64-channel LED Constant Current Drivers ◼ SPI Interface (Cascade Connection Feasible) ◼ 16-bit PWM Dimming (Min On Pulse 0.5 μs) ◼ 6-bit Global Dimming (50 % to 100 %) ◼ LED Constant C

Integrated 2.0A MOSFET 1ch Buck-Boost Converter

General Description ROHM’s highly-efficient buck-boost converter BD8306MUV produces buck-boost output voltage including 3.3 V from two-cell or three-cell alkaline battery, or one-cell lithium-ion battery with just one inductor. This IC adopts the original buck-boost drive system and creates a mor

Integrated 2.0A MOSFET 1ch Buck-Boost Converter

General Description ROHM’s highly-efficient buck-boost converter BD8306MUV produces buck-boost output voltage including 3.3 V from two-cell or three-cell alkaline battery, or one-cell lithium-ion battery with just one inductor. This IC adopts the original buck-boost drive system and creates a mor

Synchronous Buck-Boost DC/DC Converter with 2 A Switches (VIN = 2.0 V to 5.5 V, 1ch)

General Description The BD83070GWL is a synchronous buck-boost DC/DC convertor providing 3.3 V or 2.5 V output from single-cell Li-ion battery or other input between 2.0 V and 5.5 V. It has the capability to support up to 1 A output over input voltage range of 2.7 V to 5.5 V. It seamlessly change

封装/外壳：20-VFQFN 裸露焊盘 功能：升压/降压 包装：卷带（TR） 描述：IC REG BCK BST ADJ 1A 20VQFN 集成电路（IC） 稳压器 - DC-DC 开关稳压器

Synchronous Buck-Boost Controller

文件：1.2748 Mbytes Page：27 Pages

Synchronous Buck-Boost Controller

文件：1.2748 Mbytes Page：27 Pages

Synchronous Buck-Boost Controller

文件：1.2748 Mbytes Page：27 Pages

封装/外壳：16-VFQFN 裸露焊盘 功能：升压/降压 包装：管件 描述：IC REG CTRLR BUCK-BOOST VQFNV 集成电路（IC） DC-DC 开关控制器

High-effciency Step-up/down Switching Regulators with Built-in Power MOSFET

D2PAK SURFACE MOUNTSCHOTTKY BARRIER RECTIFIER(VOLTAGE- 20 to 100 Volts CURRENT - 8.0 Amperes)

VOLTAGE 20 to 150 Volts CURRENT 8 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MILS-19500/228 • Low power loss, high efficiency. • Low forwrd voltge, high

ISOLATION SCHOTTKY BARRIER RECTIFIERS(VOLTAGE 20 to 100 Volts CURRENT - 8 Ampere)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 • Low power loss, high efficiency. • Low forwrd voltge, high current capability • High surg

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS(VOLTAGE 20 to 100 Volts CURRENT - 8 Ampere)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Low power loss, High efficiency • High surge capacity • For use in low voltage high frequency inverters, free wheeling

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS(VOLTAGE 20 to 100 Volts CURRENT - 8 Ampere)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Low power loss, High efficiency • High surge capacity • For use in low voltage high frequency inverters, free wheeling

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS(VOLTAGE 20 to 100 Volts CURRENT - 8 Ampere)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Low power loss, High efficiency • High surge capacity • For use in low voltage high frequency inverters, free wheeling