Power Management Switch

Description The power switch for expansion module is a power management switch having one circuit of N-channel Power MOS FET. The switch realizes 50mΩ(Typ.) ON resistance. The switch turns on smoothly by the built-in charge pump, therefore, it is possible to reduce inrush current at switch on.

Load Switch ICs for Portable Equipment

用于扩展模块的电源开关是内置一个N channel Power MOSFET的电源管理开关。开关导通电阻实现50mΩ(Typ.)。根据内置电荷泵可以缓和地导通开关，因此能缓和开关导通时的浪涌电流。通过外置电容可以控制软启动。另外，内置低电压误工作防止电路、热关断保护电路和关闭开关时从电容性负载迅速释放电荷的放电电路。 •内置一个低导通电阻(50mΩ,Typ.)N-MOS开关\n•最大输出电流:2A\n•内置放电电路\n•内置软启动控制电路\n•内置低电压误工作防止电路(UVLO)\n•热关断(锁定工作)\n•防止关闭开关时的逆流(仅BD6522F);

Large Current Output Power Management Switch ICs

文件：493.11 Kbytes Page：17 Pages

Load Switch ICs for Portable Equipment

文件：422.03 Kbytes Page：17 Pages

封装/外壳：8-SOIC（0.173"，4.40mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC PWR SWITCH N-CHANNEL 1:1 8SOP 集成电路（IC） 配电开关，负载驱动器

Buck and Synchronous Rectifier Pulse-Width Modulator (PWM) Controller

The ISL6522 provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous rectified buck topology. The ISL6522 integrates all of the control, output adjustment, monitoring an

Single-Chip 4-Bit Microcomputers for Medium/Large-Scale Control-Oriented Applications

Single-Chip 4-Bit Microcomputers for Medium/Large-Scale Control-Oriented Applications The LC6520C/H are single-chip 4-bit microcomputers that contain a 4K-byte ROM, 1K-bit RAM, have 42 pins, and are fabricated using CMOS process technology.

Single-Chip 4-Bit Microcomputers for Medium/Large-Scale Control-Oriented Applications

Single-Chip 4-Bit Microcomputers for Medium/Large-Scale Control-Oriented Applications The LC6520C/H are single-chip 4-bit microcomputers that contain a 4K-byte ROM, 1K-bit RAM, have 42 pins, and are fabricated using CMOS process technology.

PNP (AMPLIFIER TRANSISTOR)

AMPLIFIER TRANSISTOR

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V * Pb / RoHS Free