High Voltage Series Stepping Motor Drivers

BD6425EFV、BD6423EFV、BD6422EFV是采用额定电源电压45V,额定输出电流1.0A、1.5A的低导通电阻DMOS、PWM恒流驱动方式的步进马达驱动器系列。输入接口可以选择CLK-IN驱动方式(BD6425/6423EFV)和并行IN驱动方式(6422EFV)。因为内置DAC可以实现到QUARTER STEP为止的驱动，电流衰减方式可以对FAST DECAY/SLOW DECAY的比率进行4段自由设定。即使在被要求高速旋转的应用系统上，配合马达也能实现很好的控制状态，有助于低振动，低噪音驱动。并且，因为电源可以单系统驱动，所以有助于设备的设计更容易。 •低导通电阻DMOS、额定电流1.5A\n•CLK-IN驱动方式\n•QUARTER STEP支持\n•省电功能\n•正转，反转切换功能\n•温度保护电路(TSD电路)\n•过电流保护电路(OCP)\n•低电压保护电路(UVLO)\n•POWER ON复位功能\n•小型•超薄•高散热（背面散热型)HTSSOP封装\n•电流衰减方式切换功能（Mix decay)\n•电源单系统驱动45V;

Silicon Monolithic Integrated Circuits

文件：205.3 Kbytes Page：5 Pages

Silicon monolithic integrated circuits

文件：662.61 Kbytes Page：5 Pages

Silicon monolithic integrated circuits

文件：662.61 Kbytes Page：5 Pages

封装/外壳：28-VSSOP（0.173"，4.40mm 宽）裸露焊盘 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR） 描述：IC MTR DRV BIPLR 19-42V 28HTSSOP 集成电路（IC） 电机驱动器，控制器

Speech Network Circuit

■ Features • Speech network IC for the multifunctional telephone sets • Capable of interfacing with the light-weight small receivers and ECM transmitters • Built-in 2V REG constant voltage source (2V typ) for ECM • Built-in non-linear circuits in the transmitter and receiver systems in order

10-CHARACTER 3-LINE DOT MATRIX LCD CONTROLLER DRIVER?

■ GENERAL DESCRIPTION The NJU6425 is a Dot Matrix LCD controller Driver for 10-character 3-line maximum by itself. It contains voltage doubler but the bias voltage for LCD Driving waveform is fixed by the external bleeder resistors. ■ FEATURES ● 10-character/3-line Dot Matrix LCD controller dr

10-CHARACTER 3-LINE DOT MATRIX LCD CONTROLLER DRIVER?

■ GENERAL DESCRIPTION The NJU6425 is a Dot Matrix LCD controller Driver for 10-character 3-line maximum by itself. It contains voltage doubler but the bias voltage for LCD Driving waveform is fixed by the external bleeder resistors. ■ FEATURES ● 10-character/3-line Dot Matrix LCD controller dr

VIDEO CELLULAR MATRIX

DESCRIPTION This device is intended for switching between video and chroma signals such as CVBS, SVHS, baseband CVBS, MAC. Each input clamp mode, each output gain, all switching are controlled through the I2C bus. The 8 outputs can be set separately in high impedance state, to enable parallel DC

3 AMP ADJUSTABLE INTEGRATED SWITCHING REGULATOR

文件：234.9 Kbytes Page：5 Pages